Salus FC600 Full User Manual page 52

Parameter
Type of setting
number
d03 S2/COM terminals
d04 Heat and Cool mode
selection - This
parameter is available
only when d01 = 0
(2 pipe) and d02 =
0 or 2 ( S1-COM no
function, or pipe
sensor connected)
d 05 Offset
Max heating setpoint From 5⁰C to 40 ⁰C
d06
d07 Min heating setpoint
d08 Max cooling setpoint
temperature
d09 Min cooling setpoint
temperature
d10 ECO set point in
Heating mode
d11 ECO set point in
Cooling mode
d12 Time zone
d13 DST – Day light
saving time
d14 Key lock function
52 Fan Coil FC600 Instructions Manual
Description
0 = no function - ECO mode available via "Mode" button
1 = door - ECO mode (or STANDBY) is activated via
external free-volt switch:
- terminal S2/COM is open - normal mode
- terminal S2/COM is closed - ECO (STANDBY) mode
2 = SenS - external temperature sensor is connected.
Internal sensor is inactive - thermostat displays
temperature from external sensor.
0 = Heating & Cooling available using MODE button
1 = Cooling ONLY (user can't change mode using MODE
button)
2 = Heating ONLY (user can't change mode using MODE
button)
This functions allows you to calibrate your displayed
temperature value. It can be adjusted from -3.0 ⁰C to +3.0⁰C
From 5⁰C to 40 ⁰C
From 5⁰C to 40 ⁰C
From 5⁰C to 40 ⁰C
This setting is responsible for the ECO setpoint
temperature when the thermostat is in Heating mode.
Can be set to any value from 5⁰C to 40 ⁰C.
This setting is responsible for the ECO setpoint
temperature when the thermostat is in Cooling mode.
Can be set to any value from 5⁰C to 40 ⁰C.
From -13 to +13
0 = Enabled
1 = Disabled
Use this function to enable/disable auto keylock function.
0 = manual - the user can lock the keys manually via
device or App.
1 = Auto (thermostat will lock the keys after 5 minutes
since last button press)
2 = Unlocked the user can't lock the keys.
Default
Values
0
1
0⁰C
40 ⁰C
5⁰C
40 ⁰C
5⁰C
15⁰C
30⁰C
+1
0
0