Fan Control - Salus FC600 Full User Manual

For programmable thermostat
M
00:00
Press or to check
setpoint.
M
M
M
00:00
Note: If you are using the Mode Button, please make sure that thermostat is following the appropriate Heating
or Cooling mode (if both are available).

2.6. Fan control

You can use the Fan Button
00:00
Press to select fan speed
By default, the fan is on only when the Fan Coil calls for heating or cooling.
10 Fan Coil FC600 Instructions Manual
After 1 sec Set point will flash.
The thermostat will now return to home screen and it will follow new setpoint.
It now operates in Temporary Override mode. Once the mode is activated,
the LCD will display the calendar and hand icons
mode, the thermostat will use this temporary override setpoint to control room
temperature until next Program start time. Then it goes back from Temporary
Override to Program mode.
If you press Mode Button
and the thermostat will enter previous mode.
to adjust the fan speed.
Animation
M
M
M
Press or
decrease setpoint.
M
M
M
during Temporary Override, it will get canceled
Meaning
Fan is not active
When the fan is running, the fan icon is animated
Fan speed: Low, Medium, High
Fan speed on Auto / Off. When fan is Off all dots
and Auto icon disappears
M
M M M
M
to increase /
M
Press OK
. After entering this
.
M
to save and exit.