Set Schedule; Lock Keypad; Initiate Identify Mode; Join Network - Salus Optima S User Manual

14
EDIT-
WKDY/WKND
WEEKLY
DAILY
WKDY/SA/S
SCHD OFF
6
Press to access the Schedule menus to set the Interval, Time and Set Point. See Schedule configuration page []
The Lock/Unlock function allows you to lock and unlock the keypad through the
Settings menu in addition to through the keypad and/or App.
7
LOCK KEYS?
UNLOCK KEYS?
7 Only displayed when Lock Source = KY+APP and Key Lock Type ¹ NONE
The Identify mode sends an Identify command to paired devices which support it and
their display, or LED will flash on and off to indicate they are connected devices.
8
IDENTIFY?
8
Most simple temperature, door/window, and water leak sensors do not support Identify.
Tapping the Join Network places the thermostat in a mode where it will Join an
√ to
available Zigbee network. The network channel will be displayed for 3 seconds once
the thermostat successfully joins.

JOIN NETWORK?

Note: The network Gateway or Coordinator must also be in the Join mode scanning for devices.
(default) Current schedule mode:
Press √ to edit schedule.
Press + or – to step through
schedule types
press √ to lock keys
7 press √ to unlock keys
Press √ to Initiate Identify mode
Identify Check 10 is displayed
Press √ to join network,
Press x to exit or 10 min time out
After OTA, if there is no schedule mode in
the device side and it has joined network,
then schedule mode is CLOUD, device
6
receives schedule setpoint from Gateway.
To lock and unlock the keypad.
Identify devices on
the shared channel
Initiate Join to an
available network
Salus
Identify mode counts
from 10 to 0 minutes
Displayed only if it has not
joined network.