Installing The Hard Drive Or Ssd Cage - Dell PowerEdge M630p Owner's Manual

Figure 54. Removing a hard drive or SSD cage
1. standoff (4)
3. screw (2)
Next steps
1. Install the hard drive or SSD cage.
2. Install the hard drive or SSD backplane.
3. Install the hard drive(s) or SSD(s).
4. Follow the procedure listed in the After working inside your system section.
Related References
Safety instructions on page 51
Related tasks
Removing the hard drive or SSD backplane

Installing the hard drive or SSD cage

After working inside your system
Removing a hard drive or SSD
Installing the hard drive or SSD cage
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
NOTE: You must remove the hard drive or SSD cage to replace a faulty hard drive or SSD cage or service other
components inside the system.
1. Follow the safety guidelines listed in safety instructions section.
2. Keep the Phillips #1 screwdriver ready.
3. Remove the hard drive or SSD cage.
104 Installing and removing server module components
on page 106
on page 104
on page 52
on page 94
2. hard drive or SSD cage
4. screw hole (2)