Inside The Server Module; System Memory - Dell PowerEdge M630p Owner's Manual

Inside the server module

Figure 13. Inside the server module
1. rSPI card
3. NDC
5. Cooling shroud
7. Processor 2

System memory

Your system supports DDR4 registered DIMMs (RDIMMs) and load reduced DIMMs (LRDIMMs). It supports DDR4 voltage specifications.
NOTE: MT/s indicates DIMM speed in MegaTransfers per second.
Memory bus operating frequency can be 2400 MT/s, 2133 MT/s, or 1866 MT/s depending on:
• Number of DIMMs populated per channel
• System profile selected (for example, Performance Optimized, Custom, or Dense Configuration Optimized)
• Maximum supported DIMM frequency of the processors
The system contains 24 memory sockets split into two sets of 12 sockets, one set per processor. Each 12-socket set is organized into four
channels. In each channel, the release levers of the first socket are marked white, the second socket black, and the third socket green.
NOTE: DIMMs in sockets A1 to A12 are assigned to processor 1 and DIMMs in sockets B1 to B12 are assigned to
processor 2.
The following table shows the memory populations and operating frequencies for the supported configurations.
2. PCIe mezzanine card connector (2)
4. Memory module (24)
6. Hard drive or SSD backplane
8. Processor 1
Installing and removing server module components 59