Table of Contents
Advertisement
Figure 16. Installing the memory module
a. memory module
b. memory module socket
c. memory module ejector (2)
Next steps
1. Follow the procedure listed in the After working inside your system section.
2. (Optional) Press F2 to enter the System Setup, and check the System Memory setting.
The system should have already changed the value to reflect the newly installed memory.
NOTE:
If the value is incorrect, one or more of the memory modules may not be installed properly. Check to ensure
that the memory modules are firmly seated in their sockets.
3. Run the system memory test in the system diagnostics.
Related References
Safety instructions
on page 51
Related tasks
Before working inside your system
After working inside your system
Cooling shroud
The cooling shroud has aerodynamically placed openings that directs the airflow across the entire system. The airflow passes through all
the critical parts of the system, where the vacuum that pulls air across the entire surface area of the processor and heat sink allowing
increased cooling.
Removing the cooling shroud
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
66
Installing and removing server module components
on page 51
on page 52
Advertisement
Table of Contents
Troubleshooting
