Dell PowerEdge M630p Owner's Manual page 105

Steps
1. Align the screw holes on the hard drive or SSD cage with the screw holes on the chassis.
2. Lower the hard drive or SSD cage into the chassis until it is seated firmly in place.
3. Install the four screws to secure the hard drive or SSD cage to the chassis.
Figure 55. Installing a hard drive or SSD cage
1. standoff (4)
3. screw (2)
Next steps
1. Install the hard drive or SSD backplane.
2. Install the hard drive or SSDs.
3. Follow the procedure listed in the After working inside your system section.
Related References
Safety instructions on page 51
Related tasks
Removing the hard drive or SSD cage
Installing the hard drive or SSD backplane
After working inside your system
Installing a hard drive or SSD
on page 103
on page 107
on page 52
on page 95
2. hard drive or SSD cage
4. screw hole (2)
Installing and removing server module components 105