Installing A Hard Drive Carrier Into The Hard Drive Cage - Dell E36S Series Owner's Manual

5. Remove the power and data cables from the hard drives and optical drive in the hard drive cage.
6. Remove the hard drive cage.
Steps
Press the retention clips inward and pull the hard drive out of the hard drive cage.
Figure 19. Removing hard drive carrier from the hard drive cage
1. hard drive carrier
3. retention clips (2)
Next steps
1. Install the hard drive carrier into the hard drive cage.
2. Install the hard drive cage.
3. Reconnect the power and data cables to the hard drives and optical drive in the hard drive cage.
4. Install the bezel.
5. Reconnect the peripherals disconnected from the control panel assembly.
6. Follow the procedure listed in
Related tasks
Removing the bezel on page 45
Removing the hard drive cage

Installing a hard drive carrier into the hard drive cage

Installing the hard drive cage
Installing the bezel on page 46
Installing a hard drive carrier into the hard drive cage
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
56 Installing and removing system components
After working inside your system
on page 53
on page 56
on page 54
2. hard drive
4. hard drive cage
on page 43.