Installing The Hard Drive Cage - Dell PowerEdge T30 Owner's Manual

Installing the hard drive cage

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
Steps
Insert the hard drive cage and push it into the system until it clicks into place.
Figure 19. Installing the hard drive cage
Next steps
1 Install the bezel.
2 If applicable, connect the power and data cables to the hard drives and optical drive in the hard drive cage.
3 Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing the bezel
After working inside your system
Installing and removing system components 53