Dell PowerEdge M630p Owner's Manual page 23

Table 21. Firmware and drivers
Methods
From the Dell Support site
Using Dell Remote Access Controller Lifecycle Controller (iDRAC
with LC)
Using Dell Repository Manager (DRM)
Using Dell OpenManage Essentials (OME)
Using Dell Server Update Utility (SUU)
Using Dell OpenManage Deployment Toolkit (DTK)
Downloading the drivers and firmware
Dell EMC recommends that you download and install the latest BIOS, drivers, and systems management firmware on your system.
Prerequisites
Ensure that you clear the web browser cache before downloading the drivers and firmware.
Steps
1. Go to Dell.com/support/drivers.
2. In the Drivers & Downloads section, type the Service Tag of your system in the Service Tag or Express Service Code box, and
then click Submit.
NOTE: If you do not have the Service Tag, select Detect My Product to allow the system to automatically detect your
Service Tag, or in General support, navigate to your product.
3. Click Drivers & Downloads.
The drivers that are applicable to your selection are displayed.
4. Download the drivers to a USB drive, CD, or DVD.
Location
Global Technical Support
Dell.com/idracmanuals
Dell.com/openmanagemanuals
Dell.com/openmanagemanuals
Dell.com/openmanagemanuals
Dell.com/openmanagemanuals
Initial system setup and configuration
> OpenManage Deployment Toolkit
> OpenManage Deployment Toolkit
> OpenManage Deployment Toolkit
> OpenManage Deployment Toolkit
23