Removal/Installation Of Shipping Screw And Shipping Bracket; Carrier Shipping Screw; Removal Of Bin Tray Shipping Bracket - Sony XDCAM XDJ-1000 Installation Manual

1-7. Removal/Installation of Shipping
Screw and Shipping Bracket
m
. Do not turn on the power before removing the shipping
screws and shipping brackets.
. Before moving this unit, be sure to install shipping screws
and shipping brackets.

1-7-1. Carrier Shipping Screw

1. Remove the fi ve carrier shipping screws from the right
side of this unit.
2. Attach the fi ve screws removed in step 1 to the posi-
tion of the rear panel as shown in the illustration.
2
Front
PSW3 x 6
1
PSW3 x 6
3
PSW3 x 6
When this unit is moved
Remove the fi ve screws attached to the rear panel in step 2,
then attach them to the right side of this unit in the order of
1 to 3.
1-6 (E)

1-7-2. Removal of BIN Tray Shipping Bracket

1. Remove the two screws (PSW3 x 6) from the left side
2. Remove the top screw from the upper surface of this
3. Insert the screwdriver into the hole of the upper surface
4. Attach the removed top screw to the original position.
Rear panel
PSW3 x 6
of this unit.
unit.
Top screw
PSW3 x 6
BIN shipping bracket
of this unit and pull out the BIN tray while pushing the
screwdriver downward.
Screwdriver
BIN shipping bracket BIN tray
XDJ-1000