Important Safeguards For Electrical Appliances - Gastroback DESIGN MINCER PLUS Operating Instructions Manual

wait until the motor comes to a standstill, before moving, or cleaning,
or assembling or disassembling any parts, or when the appliance is
not in use.
• Do not press the reverse button before the motor has completely come
to a standstill.
• Always grasp the motor housing at both sides near the bottom for
moving or lifting. Do not hold the appliance at the tray or cutter
housing, for moving the appliance.
• Do not use any abrasive cleaners, cleaning pads (e.g. metal scouring
pads), or any corrosive chemicals (e.g. bleach) for cleaning. Do not
immerse the motor housing or power cord in water or any other liquid.
Do not spill or drip any liquids on the motor housing, or on the power
cord to avoid risk of fire and electric shock. Do not pour any liquids in
the feed tube with the cutter housing connected to the motor housing!
When liquids are spilled in the motor housing, immediately unplug
the appliance, switch off the appliance completely (ON/OFF button),
and wait for the appliance to cool down. Thereafter, clean and dry
the appliance thoroughly. (See: ›Care and Cleaning‹)
• Do not place the appliance or any of its parts or tools in an auto-
matic dishwasher.
• Do not leave any food dry on the appliance. Always clean the appli-
ance after each use to prevent a build-up of baked-on foods (see:
›Care and Cleaning‹). Always keep the appliance and the tools clean.

IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES

The appliance is driven electrically. Place the appliance near a
suitable wall power socket to connect the appliance directly to a
protected mains power supply with protective conductor (earth/ground)
connected properly. Ensure that the voltage rating of your mains power
supply corresponds to the voltage requirements of the appliance (220-240
V, 50/60 Hz, AC, rated for at least 8 A). The installation of a residual
current operated circuit breaker (r.c.c.b.) with a maximum rated residual
operating current of 30 mA in the supplying electrical circuit is strongly
39