Power Led Indicator - Yealink T58A Administrator's Manual

Permitted
Integer from 1 to 10
Values
Default
10
Web UI Settings > Power Saving > Off Hour Idle TimeOut
Parameters features.power_saving.user_input_ext.idle_timeout
Description
It configures the minimum time (in minutes) that the phone waits in the idle state - after
being inactive - before the phone enters power-saving mode.
Example:
features.power_saving.user_input_ext.idle_timeout = 5
Permitted
Integer from 1 to 30
Values
Default 10
Web UI Settings > Power Saving > User Input Extension Idle TimeOut
Parameters
features.power_saving.office_hour.monday
features.power_saving.office_hour.tuesday
features.power_saving.office_hour.wednesday
features.power_saving.office_hour.thursday
features.power_saving.office_hour.friday
features.power_saving.office_hour.saturday
features.power_saving.office_hour.sunday
Description
It configures the start time and end time of the day's office hour.
Start time and end time are separated by a comma.
Example:
features.power_saving.office_hour.monday = 7,19
Permitted
Integer from 0 to 23, Integer from 0 to 23
Values
Default
7,19 - for Monday, Tuesday, Wednesday, Thursday, Friday.
7,7 - for Saturday, Sunday.
Web UI Settings > Power Saving > Monday/Tuesday/Wednesday/Thursday/Friday/Saturday/
Sunday

Power LED Indicator

Power LED indicator indicates power status and phone status.
It is not applicable to CP960.
You can configure the power LED indicator behavior in the following scenarios:
• The phone receives an incoming call
• The phone is busy
| Device Customization | 76
<y0000000000xx>.cfg
<y0000000000xx>.cfg