Yealink T58A Administrator's Manual page 42

Web Server Type Configuration
Yealink Teams devices support both HTTP and HTTPS protocols for accessing the web user interface.
You can configure the web server type. Web server type determines the access protocol of the web user
interface. If you disable to access the web user interface using the HTTP/HTTPS protocol, both you and
the user cannot access the web user interface.
The following table lists the parameters you can use to configure the web server type.
Parameter static.wui.http_enable
Description
It enables or disables the user to access the web user interface of the device using the
HTTP protocol.
Permitted
0-Disabled
Values
1-Enabled
Default
1
Web UI Network > Advanced > Web Server > HTTP
Phone UI
> Settings > Device Settings > Network(default password: admin) > Web Server >
HTTP Status
Parameter static.network.port.http
Description It configures the HTTP port for the user to access the web user interface of the device
using the HTTP protocol.
Permitted Integer from 1 to 65535
Values
Default 80
Web UI Network > Advanced > Web Server > HTTP Port (1~65535)
Phone UI
> Settings > Device Settings > Network(default password: admin) > Web Server >
HTTP Port
Parameter static.wui.https_enable
Description It enables or disables the user to access the web user interface of the device using the
HTTPS protocol.
Permitted
0-Disabled
Values
1-Enabled
Default
1
Web UI Network > Advanced > Web Server > HTTPS
Phone UI
> Settings > Device Settings > Network(default password: admin) > Web Server >
HTTPS Status
Parameter static.network.port.https
Description It configures the HTTPS port for the user to access the web user interface of the device
using the HTTPS protocol.
[1]
[1]
[1]
[1]
| Device Provisioning | 42
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg