Log Files; Local Log - Yealink T58A Administrator's Manual

• Resetting Device and Configuration
• Device Reboot
• Capturing the Current Screen of the Phone

Log Files

Yealink Teams devices can log events into two different log files: boot log and system log. You can choose
to generate the log files locally or sent to the syslog server in real time, and use these log files to generate
informational, analytic, and troubleshoot devices.
•

Local Log

• Syslog Log
Local Log
You can enable the local log, specify the severity level, and choose to keep the log locally or upload the
local log files to the provisioning server. The local log files can be exported via the web user interface
simultaneously.
• Local Log Configuration
• Exporting the Log Files to a Local PC
• Viewing the Log Files
Local Log Configuration
The following table lists the parameters you can use to configure the local log.
Parameter static.local_log.enable
Description
It enables or disables the device to record log locally.
Note: We recommend you not to disable this feature.
Permitted
0-Disabled, the device will stop recording log to the log files (<MAC>-boot.log and
Values
<MAC>-sys.log) locally. The log files recorded before are still kept on the device.
1-Enabled, the device will continue to record log to the log files (<MAC>-boot.log and
<MAC>-sys.log) locally. You can upload the local log files to the provisioning server or a
specific server or export them to the local system.
Default 1
Web UI Settings > Configuration > Enable Local Log
Phone UI
Parameter static.local_log.level
Description
It configures the lowest level of local log information to be rendered to the
<MAC>-sys.log file.
When you choose a log level, it includes all events of an equal or higher severity level
and excludes events of a lower severity level. The logging level you choose determines
the lowest severity of events to log.
> Settings > Device Settings > Debug(default password: admin) > Log enable
| Troubleshooting Methods | 99
<y0000000000xx>.cfg
<y0000000000xx>.cfg