YEALINK VP59 - USER GUIDE
PLACING A CALL:
USING THE HANDSET:
• Pick up the handset
• Enter the number on the dial pad
• Touch the Send soft key
USING THE SPEAKERPHONE:
• Press the Speakerphone key
• Enter the number on the dial pad
• Touch the Send soft key.
USING THE HEADSET:
• Press the Headset key
• Enter the number on the dial pad
• Touch the Send soft key.
ANSWERING INCOMING CALLS:
• Using the handset: Pick up the handset.
• Using the speakerphone:
• Using the headset: press
Smart Choice Communications | (800) 217-3096 | www.smartchoiceus.com | techsupport@smartchoiceus.com
7 Times Square 17th Floor, New York NY 10036
Activates a headset (if connected)
Mutes the microphone
Listen to your voice messages
Place a call on Hold
Redial the last call
Transfer a Call
ENDING A CALL:
•
Using the Handset: Replace the handset on the cradle.
•
Using the speakerphone or headset: Press the
•
or
key, or Press the End Call soft key.
CONFERENCING A CALL:
You can conduct conference calls with up to nine parties
(including yourself) directly on your phone. If you need to
set up a conference call with ten or more parties, ask your
system administrator for details.
To set up a multi-party Conference Call:
1.
Touch the Conference soft key during an active call.
The call is placed on hold.
2.
Enter the number of the second party, and then touch
the green Conference soft key.
3.
Touch the Conference soft key again when the second
party answers. All parties are now joined in the
conference.
4.
Repeat Step 3 to add more parties to the call.
5.
Touch the red End Call soft key to disconnect all
parties.
© 2021 Smart Choice Communications, LLC
Need help?
Do you have a question about the VP59 and is the answer not in the manual?
Questions and answers