Yealink CP960 Quick Reference Manual

Yealink CP960 Conference Phone
Quick Reference Guide
Feature availability is based on the original order and the system administrator's requests for each
deployment. Please contact your system administrator or Telesystem directly to discuss any
additions to the system.
Dynamic Touchscreen: Display shows
any available options while on or off a
call. Tap to use features on screen.
Swipe to see additional options.
Volume: adjust ringer or
speaker volume
Toledo, Ohio
LED Indicators: Lit while call is in
progress. Tap the indicator to
enable/disable mute (red while
muted, green while exchanging
audio).
Home button: reverts
back to home screen if
tapped.
| Philadelphia, Pennsylvania |
Blue Platform
Basic Call Handling
Place a call
To place a call, tap
Active call handing
The phone's display changes while on an active call to show the information
about the call itself, the participants, and other available features.
Invite- tap to add caller(s). Speak
with up to four other callers
simultaneously.
DND- tap to enable or disable the
do not disturb feature (no
incoming calls while this is
enabled).
Mute- tap to enable or disable
the mute feature. While engaged,
you can hear your caller(s), but
they cannot hear you.
More- tap to gain access to any
additional features such as Hold,
programmed DSS keys, transfer.
End Call- tap to hang up the call. If
you are speaking to only two
other callers, you will transfer
them to each other. If you are
speaking to three or more callers,
you will end the call for all
participants.
1.888.808.6111 | www.telesystem.us
, enter the desired number, then tap Send.
Invite
6103559700
Local
3:05
DND Mute
EndCall
10:47 AM
More
12.7.20