Yealink T58A Administrator's Manual page 75

Note: For VP59 Teams phones, if you disable the power saving feature, the phone will
automatically enter power-saving mode to protect the screen when the phone is inactive for 72
hours. Image persistence may be caused on LCD if power saving is disabled.
The following table lists the parameters you can use to configure power saving.
Parameter features.power_saving.intelligent_mode
Description
It enables or disables the power saving intelligent mode.
Permitted
0-Disabled, the phone stays in power-saving mode even if the office hour arrives the next
Values
day.
1-Enabled, the phone will automatically identify the office hour and exit power-saving mode
once the office hour arrives the next day.
Default 1
Param eter features.power_saving.enable
Description
It enables or disables the power saving feature.
Note: It is only applicable to VP59 phones.
Permitted 0-Disabled, the phone automatically enters the power-saving mode to protect the screen
Values when the phone is inactive for 72 hours. Image persistence may be caused on LCD.
1-Enabled
Default 1
Web UI Settings > Power Saving > Power Saving
Parameters features.power_saving.office_hour.idle_timeout
Description
It configures the time (in minutes) that the phone waits in the idle state before the phone
enters power-saving mode during office hours.
Example:
features.power_saving.office_hour.idle_timeout = 600
The phone will enter power-saving mode when it has been inactivated for 600 minutes (10
hours) during office hours.
Permitted
Integer from 1 to 960
Values
Default 120
Web UI Settings > Power Saving > Office Hour Idle TimeOut
Parameters features.power_saving.off_hour.idle_timeout
Description
It configures the time (in minutes) that the phone waits in the idle state before IP phone
enters power-saving mode during the non-office hours.
Example:
features.power_saving.off_hour.idle_timeout = 5
The IP phone will enter power-saving mode when it has been inactivated for 5 minutes
during the non-office hours.
| Device Customization | 75
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg