Bluetooth Configuration; Common Area Phone - Yealink T58A Administrator's Manual

For T56A/T55A Teams phones, make sure the Bluetooth USB Dongle BT41 is connected to the phone.
•

Bluetooth Configuration

Bluetooth Configuration
You can activate or deactivate the Bluetooth mode, and personalize the Bluetooth device name for the
phone. The pre-configured Bluetooth device name will be displayed in the scanning list of other devices. It
is helpful for the other Bluetooth devices to identify and pair with your phone.
The following table lists the parameters you can use to configure Bluetooth.
Parameter
Description
Permitted Values
Default
Phone UI
Web UI
Parameter
Description
Permitted Values
Default
Phone UI
[1]
If you change this parameter, the device will reboot to make the change take effect.

Common Area Phone

A common area phone is typically placed in an area like a lobby or another area which is available to many
people to make a call; for example, a reception area, lobby, or conference phone. Common area phones
are set up as devices rather than users, and can automatically sign into a network.
You need to set up an account for the phone system to deploy common area phones for your organization.
You have access to certain featuers for the common area phones:
CAP account: You have calls capability. You also have searching capability if your system administrator
•
enable it on the Microsoft Teams & Skype for Business Admin Center.
features.bluetooth_enable
It triggers the Bluetooth mode to on or off.
0-Off
1-On
0
(More) > Settings > Device Settings > Bluetooth > Bluetooth
Features > Bluetooth > Bluetooth Active
features.bluetooth_adapter_name
It configures the Bluetooth device name.
Note: It works only if "features.bluetooth_enable" is set to 1 (On).
String within 64 characters
For T58A: Yealink-T58
For T56A: Yealink-T56A
For T55A: Yealink-T55A
For VP59: Yealink-VP59
For CP960: Yealink-CP960
(More) > Settings > Device Settings > Bluetooth > Device Name
| Common Area Phone | 78
<y0000000000xx>.cfg
<y0000000000xx>.cfg