Table of Contents
Advertisement
Item
Maximum current
Old track display
Old track date
ARPA(TT) track save
ARPA track display
ARPA track delete
Thickness
Section 5 Map Screen Operation Procedure
Setting contents
Set a maximum current value to be attached
to the track.
Setting a maximum current value
Select a digit to be set by using
(Left/Right) keys and select a value by
using the
(Up/Down) keys.
After changing the value, determine the
setting by pressing the
key.
Set whether an old track is to be
displayed.
If a check mark is attached, this item is
enabled and if a check mark is
removed, this item is disabled.
Set a date of old track.
Setting a date
Select a digit to be set by using
(Left/Right) keys and select a value by
using the
(Up/Down) keys.
After changing the value, determine the
setting by pressing the
key.
Set whether a track of other ship is to be
recorded by ARPA (Automatic Radar
Plotting Aids).
If a check mark is attached, this item is
enabled and if a check mark is
removed, this item is disabled.
Set whether a track of other ship is to be
displayed by ARPA.
If a check mark is attached, this item is
enabled and if a check mark is
removed, this item is disabled.
Delete display of other ship from the
screen by ARPA.
When this item is selected, [Yes] [No] is
displayed.
To delete the display, select [Yes].
Set a thickness of the track.
5-12
Setting value
(Underline: Default value)
0.10kn to 5.00kn to 9.99kn
(Center) or
Enable
Disable
00.01.01 to 99.12.31
(Center) or
Enable
Disable
Enable
Disable
Yes
No
1 dot
2 dot
3 dot
Advertisement
Table of Contents
