Table of Contents
Advertisement
Do not disassemble or remodel this equipment. Otherwise, an electric shock, fire,
or malfunction may occur.
Do not wet or pour water into this equipment.
Otherwise, an electric shock, fire, or malfunction may occur.
Do not use this equipment at any voltage other than the supply voltage stated on the
equipment.
Otherwise, an electric shock, fire, or malfunction may occur.
Do not scratch, damage, or modify the power cord.
If a heavy object is placed on the cord or the cord is heated, pulled, or forcibly
bent, the cord will be broken resulting in fire or an electric shock.
Never attempt to check or repair the inside of the equipment.
Inspection and repair by anyone other than specialized engineers may result in fire,
an electric shock, or malfunction .
Please request internal inspection and repair to JRC or a JRC distributor.
Before removing or inserting the cable connector to peripheral equipment, be sure
to turn off the power.
Use with the cable connector connected may cause fire or an electric shock.
When any abnormality such as smoke, unusual odor, or unusually high temperature
is detected, turn off the switch immediately and remove the power cable.
Then contact JRC or your dealer.
Continuing operation as is may cause fire or an electric shock.
Do not operate this equipment during navigation.
Otherwise a maritime accident may occur.
Always disconnect the power cable from the processing unit when setting a resolution
of the monitor.
Otherwise, fire, an electric shock, or malfunction may occur.
xx
Advertisement
Table of Contents
