Table of Contents
Advertisement
Item
Waypoints
Set how waypoints are to be displayed.
Icon: Only the symbol is displayed.
Icon + Name: The symbol and the name are
displayed.
Selected: Display that is set in [Display method] of
[Waypoints creation] screen.
Delete waypoint
Set how to delete waypoint.
confirm
Enable: Display the confirmation screen for deletion.
Disable: Do not display the confirmation screen for
deletion.
Variable line width
Set a width of the variable cursor in dot units.
Variable line color
Set a color of the variable cursor.
Video
Set an image signal system of the external video
equipment.
See Section 6.5.1.1 "Setting the equipment
according to the image signaling system".
Calibrate
Temperat
Calibrate the value of the temperature data that is
ure offset
received.
Setting an offset value
Select a digit to be set by using the
(Left/Right) keys, change the value by using the
using the
Keel
Calibrate the value of the keel data that is received.
offset
Setting an offset value
Select a digit to be set by using the
(Left/Right) keys, change the value by using the
using the
Setting Contents
(Up/Down) keys, and confirm the change by
(Center) or
(Up/Down) keys, and confirm the change by
(Center) or
8-37
(Underline: Default
Icon
I+N
Selected
Enable
Disable
1 dot
2 dot
16
available for setting.
NTSC
PAL
SECAM
-9.9°C to 0.0°C to
+9.9°C
key.
-9.9m to 0.0m to
+9.9m
key.
Section 8 System Configuration Menus
Setting value
value)
colors
are
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
Advertisement
Table of Contents
