Table of Contents
Advertisement
Item
Key light
Arrow key
Input time over
Trackball
Data bar mode
Units
Distance
Speed
Depth
Fuel
Section 8 System Configuration Menus
Setting Contents
Select a brightness of the light of the key of the
operation unit.
Auto: Bright at the operation and becomes
dark if no operation is performed for about 60
seconds.
High: Increases the brightness.
Low: Reduces the brightness.
Select the operation on the chart screen when
the Up/Down/Left/Right keys of the operation
unit are pressed.
Normal: The cursor (viewpoint) moves in the
direction of the key that is pressed.
Reverse: The chart moves in the direction of
the key that is pressed.
Set an input wait time at the operation of
System Configuration menu.
When not setting any wait time, set [Off].
Select an amount of the display movement
corresponding to the rotation of the trackball.
The amount decreases in the order of
Normal→Mid→Low.
Select a data bar pattern to be displayed from
[type – 1] , [type – 2] or [None].
For the patterns, see Section 4.2.3 "Switching
a data pattern".
Set a unit of a distance.
Set a unit of a speed.
Set a unit of a depth.
Set a unit of a fuel.
8-2
Setting value
(Underline: Default
value)
Auto
High
Low
Normal
Reverse
Off
10 sec
20 sec
30 sec
Normal
Mid
Low
type - 1
type - 2
None
nm
mi (mile)
km
kn
mph (mile/hour)
kph (km/hour)
ft
m
fa (fathom)
Litres
USGal (US gallon)
lmpGal (Imperial
gallon)
Advertisement
Table of Contents
