Table of Contents
Advertisement
Item
Time
Temperature
Temperature1
Temperature2
Temperature3
Temperature4
Temperature5
Temperature6
Temperature7
Section 5 Map Screen Operation Procedure
Setting contents
Set whether a time is to be added to the
track.
When a check mark is attached, the
item is enabled and when the check
mark is removed, the item is disabled.
Set a temperature within the range from
Temperature1 to Temperature7.
The temperature range that can be set
from Temperature1 to Temperature7 is
from 0.0°C to 40.0°C in 0.1°C units. This
range is divided into 7, creating
Temperature1 to Temperature7.
Setting a temperature range
Select a digit to be set by using
(Left/Right) keys and select a value by
using the
(Up/Down) keys.
After changing the value, determine the
setting by pressing the
key.
The color that is displayed on the setting
screen is assigned to each water
temperature range.
5-10
Setting value
(Underline: Default value)
Enable
Disable
Temperature1:
0.0°C to (Minimum
temperature of
Temperature2 0.1°C)
Temperature2:
(Maximum temperature of
Temperature1 + 0.1°C) to
(Minimum temperature of
Temperature3 0.1°C)
Temperature3:
(Maximum temperature of
Temperature2 + 0.1°C) to
(Minimum temperature of
Temperature4 0.1°C)
(Center) or
Temperature4:
(Maximum temperature of
Temperature3 + 0.1°C) to
(Minimum temperature of
Temperature5 0.1°C)
Temperature5:
(Maximum temperature of
Temperature4 + 0.1°C) to
(Minimum temperature of
Temperature6 0.1°C)
Temperature6:
(Maximum temperature of
Temperature5 + 0.1°C) to
(Minimum temperature of
Temperature7 0.1°C)
Temperature7:
(Maximum temperature of
Temperature6 + 0.1°C) to
40.0°C
Advertisement
Table of Contents
