JRC JLZ-1000 Instruction Manual page 26

Color plotter
Hide thumbs Also See for JLZ-1000:
Table of Contents

Advertisement

SD card and USB memory stick
Do not attempt to disassemble or tamper with this equipment.
Otherwise, fire, an electric shock, or a failure may occur.
Do not wet an SD card or a USB memory stick with water, and so on.
Otherwise, fire, an electric shock, or a failure may occur.
Do not place a heavy item on an SD card or a USB memory stick or apply a strong
impact.
Otherwise, a failure may occur.
Do not store or use an SD card or a USB memory stick in any of the following places
(environment).
Otherwise, a failure or a malfunction may occur.
Place that is exposed to direct sunlight
Place of high humidity or dust content
Near an item that generates heat (such as heater or stove)
Near an item that generates strong magnetic radio waves (such as magnet,
speaker, or radio unit)
Place that generates static electricity
Insert an SD card or a USB memory stick straight in the
correct direction.
Otherwise, a failure or a malfunction may occur.
To clean an SD card or a USB memory stick, wipe it with a dry soft cloth gently. Do
not use thinner or benzene.
Otherwise, a failure or a malfunction may occur.
Always store them in their attached case after using.
Otherwise, a failure or a malfunction may occur.
xxiv

Advertisement

Table of Contents
loading

Table of Contents