JRC JLZ-1000 Instruction Manual page 216

Color plotter
Hide thumbs Also See for JLZ-1000:
Table of Contents

Advertisement

A
G
GPS
Track & Log
A
H
Section 14 Appendix/Reference Materials
Noise filter: Off/Medium/High
Pulse length: Auto/Short/Medium/Long
Pulse power: Auto/Low/ Medium/High
Color erase: Off/Low/Medium/High
Transmission: 600W/1KW
Restore default: Yes/No
GPS ANT
DGPS SBAS:None/SBAS
GPS
Initialize GPS
Set DGPS
Magnetic
Enabled: Enable/Disable
Variation
Value: 99.9'W ~ 00.0'E ~ 99.9'E
Tracks
Display: Off, On
Partial display: Off/5/10/20/30/50/100 dot
Track source: Normal, Depth, Temperature
Data
Tem-
perature
I
14-14
DATE: 00.01.01 ~ 99.12.31
Time: 00.00 ~ 23.59
Position(LAT)
Position(LON)
ANT height: -1000 ~ +0005 ~ +9999
Fix mode: 2D/3D/Auto
DOP level: Under 4, Under 10, Under 20
POS average: 002 ~ 999
Set data
Mode: Auto/Manual
Frequency: 280.0KHz ~ 310.0KHz ~ 330.0KHz
Baud rate: 50bps/100bps/200bps
Correction mode: BEACON/SBAS/Auto
Set data
Depth: Enable/Disable
Temperature: Enable/Disable
Current: Enable/Disable
Date: Enable/Disable
Time: Enable/Disable
Temperature1: 0.0°C to (minimum
temperature of Temperature2  0.1°C)
Temperature2: (Maximum temperature of
Temperature1 + 0.1°C) to (Minimum
temperature of Temperature3  0.1°C)
J

Advertisement

Table of Contents
loading

Table of Contents