JRC JMR-5400 Series Instruction Manual
  1. Manuals
  2. Brands
  3. JRC Manuals
  4. Plotter
  5. JMR-5400 Series
  6. Instruction manual

JRC JMR-5400 Series Instruction Manual

Hide thumbs Also See for JMR-5400 Series:
Table of Contents

Advertisement

Quick Links

JMR-5400 SERIES
JMR-5400 SERIES
INSTRUCTION
INSTRUCTION
PLOTTER
PLOTTER
MANUAL
MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JMR-5400 Series and is the answer not in the manual?

Questions and answers

Al Blaney
February 28, 2025

how do I clear an active acknowledgement alarm

0
1 comments:
Mr. Anderson
February 28, 2025

To clear an active acknowledgement alarm on a JRC JMR-5400 Series, follow these steps:

1. Open the target acquisition alarm setup screen by navigating through the menu:
- Press the [Menu] button.
- Select 09. Alert.
- Choose 02. Target acquisition alarm.

2. Locate the alarm that needs to be cleared.

3. Acknowledge the alarm to stop the alert sound and change the status.

The alarm indication will change based on the type:
- Alarms (Red): Blinking before acknowledgement, lighting after acknowledgement.
- Warnings (Orange): Blinking before acknowledgement, lighting after acknowledgement.
- Cautions (Yellow): Lighting without sound.

Once acknowledged, the alarm status will update accordingly.

This answer is automatically generated

0

Related Manuals for JRC JMR-5400 Series

Summary of Contents for JRC JMR-5400 Series

  • Page 1 PLOTTER PLOTTER JMR-5400 SERIES JMR-5400 SERIES INSTRUCTION INSTRUCTION MANUAL MANUAL...
  • Page 3 PREFACE Thank you for purchasing the JRC Multi Function Display JMR-5400 Series. This equipment meets the performance standards of the IMO (International Maritime Organisation), and serves to improve safety. For the best operation, read this manual thoroughly before use. Keep this manual in a convenient place for future reference.
  • Page 4  Safety Cautions  Cautions for High Voltage High voltages, ranging from several hundreds to tens of thousands of volts, are used in electronic apparatus, such as radio and radar instruments. These voltages are totally harmless in most operations. However, touching a component inside the unit is very dangerous. (Any person other than authorized service engineers should not maintain, inspect, or adjust the unit.) High voltages on the order of tens of thousand volts are most likely to cause instant deaths from electrical shocks.
  • Page 5  Emergency Measures  Method of First-Aid Treatment Precautions for First-Aid Treatments Apply artificial respiration to the person who collapsed, minimising moving as much as possible avoiding risks. Once started, artificial respiration should be continued rhythmically. (1) Refrain from touching the patient carelessly as a resultof the accident; the first-aider could suffer from electrical shocks by himself or herself.
  • Page 6  Treatment to Give When the Patient Has a Pulse Beating but Has Ceased to Breathe ∗ Performing mouth-to-mouth artificial respiration (1) Bend the patient's face backward until it is directed to look back. (A pillow may be placed under the neck.) (2) Pull up the lower jaw to open up the airway.
  • Page 7 Flow of Cardiopulmonary Resuscitation (CPR) A person is collapsing. A person is collapsing. - Secure the safety of the surrounding area. - Secure the safety of the surrounding area. - Prevent secondary disasters. - Prevent secondary disasters. Listen to the appeal of the Responding Check for response.
  • Page 8 Specific Procedures for Cardiopulmonary Resuscitation (CPR) 1. Check the scene for safety to prevent secondary disasters Are you OK? a) Do not touch the injured or ill person in panic when an accident has occurred. (Doing so may cause electric shock to the first-aiders.) b) Do not panic and be sure to turn off the power.
  • Page 9 b) If the injured or ill person is breathing, place him/her in the recovery position and wait for the arrival of the emergency services. • Position the injured or ill person on his/her side, maintain a clear and open airway by pushing the head backward while positioning Roll gently in the opposite their mouth downward.
  • Page 10 2) Perform chest compressions • Perform uninterrupted chest compressions of Compress with these parts (the 30 at the rate of about 100 times per minute. heels of both hands). While locking your elbows positioning yourself vertically above your hands. • With each compression, depress the chest wall to a depth of approximately 4 to 5 cm.
  • Page 11 indicated on the pads, If the chest is wet with water, wipe dry with a dry towel and the like, and then paste the pads. If there is a pacemaker or implantable cardioverter defibrillator (ICD), paste the pads at least 3cm away from them.
  • Page 12 16. When to stop CPR (Keep the electrode pads on.) a) When the injured or ill person has been handed over to the emergency services b) When the injured or ill person has started moaning or breathing normally, lay him/her on his/her side in a recovery position and wait for the arrival of emergency services.

  • Page 13: Pictorial Indication

     Pictorial Indication  Meanings of Pictorial Indication Various pictorial indications are included in this manual and are shown on this equipment so that you can operate them safely and correctly and prevent any danger to you and / or to other persons and any damage to your property during operation.

  • Page 14: Precautions Upon Equipment Operation

     Precautions upon Equipment Operation  DANGER Never attempt to check or repair the inside of the equipment. Checking or repair by an unqualified person may cause a fire or an electric shock. Contact our head office, or a nearby branch or local office to request servicing.
  • Page 15 When turning off the power supply, do not hold down the power button of the operation unit. Otherwise, a trouble may occur due to termination failure. When conducting maintenance work, make sure to turn off the power so that the power supply to the equipment is completely cut off. Some equipment components can carry electrical current even after the power switch is turned off, and conducting maintenance work may result in electric shock, equipment failure, or accidents.
  • Page 16 Do not use the offset function during navigation. If the equipment is used with the offset value entered as the own ship position (deviated from the actual position), accidents may result. Change of the colour of the Day/Night button, particularly the use of the [Night] colour, may interfere with the recognition of display information.
  • Page 17 Do not use or leave the equipment under direct sunlight for a long time or in the temperatures above 55°C. Otherwise, a fire or a malfunction may occur. Do not place a glass or cup containing water, etc., or a small metal object on this equipment.
  • Page 18 Glossary Admiralty Information Overlay published by United Kingdom Hydrographic Office (UKHO). Automatic Identification System Acquisition/Activation zone Anti-clutter rain Rain/snow clutter suppression Anti-clutter sea Sea clutter suppression AZImuth stabilisation mode BCR/BCT Bow Crossing Range/Bow Crossing Time Chart Maintenance Software to manage the charts. Imports and updates the charts. C-MAP MAX* Digital chart data by C-MAP Course To Steer.
  • Page 19 Long Pulse Marine Equipment Directive. Request standard for standardisation of marine equipment within the EU region The formal name is Multi Function Display. The navigation support functions such as RADAR, ECDIS, CID, and AMS can be executed by switching. MMSI Maritime Mobile Service Identity Man Over Board Performance MONitor...
  • Page 20 True Motion. A display across which the own ship and targets move with their own true motions. To WPT To Waypoint (To WPT) Trails Tracks displayed by the radar echoes of targets in the form of an afterglow Trial manoeuvre A graphical simulation facility used to assist the operator to perform a proposed manoeuvre for navigation and collision avoidance purposes True vector...
  • Page 21 Pulse compression Correlation processing performed when a transmitted chirp signal is received by a solid-state radar after reflecting off the target. This processing gain enables the radar to have necessary detection capability even when a transmission power is low. Radar beacon A navigation aid which responds to the radar transmission and generates radio wave Range...
  • Page 22 Notations Operation notations Trackball operations on the operation panel are expressed as follows. Operation Notation Click the left button. Click Example: Click on the object. Double-click the left button. Double-click Example: Determine the drawing by double-click. Click the right button Click the right mouse button Example: Display the context menu by clicking the right mouse button.

  • Page 23: Table Of Contents

    Contents PREFACE ........................i Pictorial Indication ....................xi Precautions upon Equipment Operation ............. xii Section 1 Overview ..................... 1-1 Functions ..........................1-2 Features ..........................1-3 Section 2 Basic Operations and Mode Screen ..........2-1 Changing the Mode ....................... 2-1 Sections and Features of the Mode Screen................2-2 2.2.1 Menu button ........................
  • Page 24 3.2.4 Operation via [Dropped EBL/VRM] - [Move base point of EBL1/VRM1] or [Move base point of EBL2/VRM2]................. 3-5 3.2.5 Operation via [CCRP EBL/VRM] - [Make EBL1/VRM1] or [Make EBL2/ VRM2] ..3-5 3.2.6 Operation via [CCRP EBL/VRM] - [Make EBL1] or [Make EBL2] ......3-6 3.2.7 Operation via [CCRP EBL/VRM] - [Make VRM1] or [Make VRM2] ......
  • Page 25 6.1.1 Registering/displaying my Ports ................... 6-1 6.1.2 Displaying the chart by inputting the position ............... 6-2 Screen Display Settings ......................6-3 6.2.1 Configuring the ship symbol display ................6-3 6.2.2 Configuring the own track display ................. 6-4 6.2.3 Configuring the TT/AIS target display ................6-8 6.2.4 Configuring the distance/direction measuring function display........
  • Page 26 B.1.14 Code Input ........................B-32 B.1.15 Service ........................B-33 B.2 Context Menu List ........................B-38 B.2.1 No object (RADAR/Synthesis mode) ................B-38 B.2.2 No object (Plotter mode) ....................B-38 B.2.3 AIS........................... B-39 B.2.4 TT ............................ B-45 B.2.5 GPS Buoy ........................B-46 B.2.6 NAVTEX ..........................

  • Page 27: Changing The Mode

    Mode Screen 2.1 Changing the Mode If an optional plotter is installed on the JMR-5400 series ship radar equipment, use the mode switching button on the right tool bar to switch the mode between the radar mode, synthesis mode, and plotter mode.

  • Page 28: Sections And Features Of The Mode Screen

    2.2 Sections and Features of the Mode Screen 2.2.1 Menu button Click on the menu button to display the top menu. For details of menu operations, see the Instruction Manual of the ship radar equipment. Menu in plotter mode The following table lists the menu items displayed only in plotter mode, menu items to which items only enabled in plotter mode are added, and menu items whose contents differ in plotter mode.

  • Page 29: Key Assignment Display Area

    2.2.2 Key assignment display area Rotate the [Multi] Dial to operate assigned functions. Assigned function 2.2.2.1 Change the assignment Press the [Multi] Dial. The Key Assignment dialogue box is displayed. Rotate the [Multi] Dial to select an assigned function from [Multi Dial]. In plotter mode, the following functions can be selected.

  • Page 30: Ship Information

    2.2.3 Ship information Do not use the offset function while the ship is underway. If the equipment is used with an offset value input in the ship position (state of being shifted from the actual position), an accident may be caused. The ship information is displayed.
  • Page 31 UTC/Local date and time The current date and time are displayed. Click on it to switch between the UTC time and the local time. From the menu, select [Maintenance] - [Date/Time/Time Zone] - [Display Style] to configure the date format. For details of configuring the data and time, see the Instruction Manual of the ship radar equipment.
  • Page 32 See the previous page. [Position] dialogue The position information is displayed. (1) The position data name is displayed. (2) The position sensor source is displayed. Select a sensor source from the [Source] combo box. The following sensor sources can be selected.

  • Page 33: Right Tool Bar

    2.2.4 Right tool bar The following describes the functions of buttons on the right tool bar. Message notification button Daytime/night button Click on it to display the latest notification messages received Change the screen brightness in five steps regarding AIS, MSG Tray, and NAVTEX. depending on the brightness in the bridge.

  • Page 34: Tool Bar

    2.2.5 Tool bar The following describes the functions of buttons on the tool bar. Some buttons are hidden in normal cases. Change the button display by clicking on the disclosure button. Displayed in normal cases Hidden in normal cases Disclosure button Click on the disclosure button to show the buttons that are...
  • Page 35 2.2.5.1 Buttons displayed in normal cases [AUTO] (Cursor mode selection) button Click on it to set the cursor mode to the AUTO mode. [U.Map] (user map) button For details of the cursor mode, see the Click on it to display the tool bar for Instruction Manual of the ship radar drawing the user map.

  • Page 36: Alert Notification Area

    2.2.5.2 Buttons hidden in normal cases [Def.] button Resets the user preferences to the factory default settings. It works in the same way as the [Initialise [Map On/Off] button the displayed settings] button on the [User Shows or hides the user map. preferences] dialogue of the [Settings] menu.

  • Page 37: Chart Information Area

    2.2.7 Chart information area The chart information area consists of the following information display sections, buttons and tools. 2.2.7.1 Scale/range combo box The current scale or range is displayed. Scale Range Select a scale or range from this combo box. Click on the scale/range combo box to display the scale/range selection list.
  • Page 38 2.2.7.2 Motion mode combo box Displays the current motion mode. Select a motion mode from the combo box. Click on the motion mode combo box to select a motion mode. Setting item Description True Motion Mode The ground and other objects are fixed on the screen and only the ship moves. The [TM] chart automatically shifts when the ship reaches the predefined end of the screen so that the ship is always displayed in the upper part of the screen.
  • Page 39 2.2.7.3 Direction mode combo box Displays the current direction mode. Select a direction mode from the combo box. Click on the direction mode combo box to select a direction mode. Setting item Description North Up (true bearing) • The chart is displayed with the north always on top. It provides great chart [N UP] visibility because of no flickering of fixed objects, and the true bearing of each object can be read easily.
  • Page 40 2.2.7.4 [HOME] button Click on it to move the chart so that the ship position is displayed. This button is useful when you lose sight of the ship position. 2.2.7.5 [Mark] (mark input position) Select a position to insert a mark when inserting a mark using a numeric key. Click on the mark positioning button to change the button as follows.
  • Page 41 2.2.7.8 [Track] (own track colour) The current ship's own track colour is displayed. When the [Track] is enclosed with blue borders, the multi-function knob is assigned the colour change function. Click on the colour icon to display the [Plot Colour] dialogue on which you can select a colour from the following.
  • Page 42 2.2.7.9 Observation scene selection button Displays the current observation scene. The signal processing pattern is set in accordance with the normal use state in order to acquire optimal radar images. Select an observation scene in accordance with the current oceanographic condition to acquire optimal images.
  • Page 43 2.2.7.10 Zoom slider Used to scale the chart. [In] button Click on it to zoom in the chart. Slider Move the slider knob upward to zoom in the chart. Move the slider knob downward to zoom out the chart. [Out] button Click on it to zoom out the chart.

  • Page 44: Sub Information Area

    2.2.8 Sub information area Click on each tab to display relevant information. Memo Tabs displayed differ depending on the setting on the [Control] dialogue of the [View] menu. Tabs Click on each tab to display relevant information. • [Watch] dialogue (See 2.2.8.1 [Watch] dialogue.) •...
  • Page 45 (3) AIS (AIS function) button and AIS filter display button (a) AIS (AIS function) button Turns on/off AIS. Click on it to turn on/off the function. If AIS is disabled, nothing is displayed. OFF: (b) AIS filter display button When AIS is ON, [Filter] is displayed. When the AIS filter is ON, [Filter] is enclosed with blue borders.
  • Page 46 REL, GND, or SEA is added to the end of the display names of TT1 and TT2 buttons depending on the radar motion mode or stabilisation mode (e.g. TT1-GND). Text Motion mode Stabilisation mode Relative motion display (RM) — True motion display (TM) Speed over ground True motion display (TM) Speed through the water...
  • Page 47 2.2.8.3 [Current] dialogue (1) [Set] Displays the direction of the current. (2) [Drift] Displays the speed of the current. 2.2.8.4 [Trails] dialogue Use the [Trails] dialogue to set the display of other ships' trails. True motion or relative motion can be used for the trail display mode. Display mode Description Draws the absolute trails of other ships irrelevant to the own ship.
  • Page 48 (1) True/relative trail switching button Click on it to change the trail display to true motion or relative motion. T: True motion display R: Relative motion display Available trail display modes differ depending on the configured motion modes. The display mode will be fixed to the true motion mode if the motion mode is TM (true motion). (2) Trail length switching combo box Changes the trail length The following trail lengths can be selected depending on the radar trail length set in the radar mode.

  • Page 49: Common Information Window

    2.3 Common Information Window The Common Information window is used in the radar mode and plotter mode in the same manner. Memo For details of the Common Information window, see the Instruction Manual of the ship radar equipment. The Common Information window consists of the Information Monitoring window and the Information Reference window.

  • Page 50: Operating The Information Monitoring Window

    2.4 Operating the Information Monitoring Window The following describes operations and edit of the Information Monitoring window in plotter mode. 2.4.1 Opening the information monitoring window Click on the page switching button on the initial window. Initially, the content is empty. Click on the page switching button to display the [Page Selection] dialogue.
  • Page 51 Clicking on the monitoring information you want to show opens the relevant window. Click 2-25 Section 2 Basic Operations and Mode Screen...
  • Page 52 To go back to the [Page Selection] dialogue from each window Click on the page switching button on each window to go back to the [Page Selection] dialogue. Click Displaying items in a separate window Select check boxes for items you want to display in a separate window. Click on [New Window] (separate window) button.

  • Page 53: Opening The Information Monitoring Window From A Dialogue Other Than The

    2.4.2 Opening the information monitoring window from a dialogue other than the [Page Selection] dialogue The following table lists the procedures to open the Information Monitoring window from a dialogue other than the [Page Selection] dialogue. Information Monitoring window Display method 1) Click on the TT symbol.

  • Page 54: Managing Files On The [File Manager] Dialogue

    2.5 Managing Files on the [File Manager] Dialogue Confirm computer virus does not exist in external storage media beforehand when reading and writing of the file by using external storage media. Influences other equipment when the display unit is infected with the virus, and it may cause a breakdown.
  • Page 55 2.5.1.1 Copying Files This section describes an example of copying the list of files on the drive specified in the [Drive] list on the left to the [Drive] list on the right on the dialogue. Click on the [File Management] tab. From the [Drive] combo box, select a drive where files to be copied are saved.

  • Page 56: Loading/Saving The Destination Route File

    2.5.2 Loading/saving the destination route file On the [File Load/Save] tab, destination route files can be loaded and saved. The following table lists the items displayed on the [File Load/Save] tab. Item Description Select a file type. Available types are Own Track, Target Track, and File Type Plotter Route.
  • Page 57 2.5.2.2 Unloading the destination route data (data deletion from the screen) Click on the [File Load/Save] tab. Select [Plotter Route] from the [File Type] combo box. Click on the [Delete Current Route and Destinations] button. A confirmation dialogue is displayed. Click on the [OK] button.
  • Page 58 Section 2 Basic Operations and Mode Screen 2-32...

  • Page 59: Section 3 Operations On The Chart Screen

    Section 3 Operations on the Chart Screen This chapter describes chart operations available in plotter mode. 3.1 Displaying the Chart in Multi-View Display The multi-view feature can divide the chart screen into two sections so that the same or a different chart can be displayed on each screen.

  • Page 60: Operating The Multi-View Screen

    3.1.2 Operating the multi-view screen 3.1.2.1 Behavior of the multi-view screen • View1 and View2 look the same. • View1 and View2 operate in the same manner except the items configured only in View2. • The progress of the creation, edit, and other operations (e.g. destination route planning) is displayed only in the active view.

  • Page 61: Operating Ebl/Vrm Via The Context Menu

    3.2 Operating EBL/VRM via the Context Menu In plotter mode, the context menu for operating EBL/VRM can be displayed by right-clicking on the chart. Memo • The context menu described here is the one poped up by right-clicking on anywhere except on specific objects such as AIS and TT.

  • Page 62: Operation Via [Dropped Ebl/Vrm] - [Make Ebl1/Vrm1] Or [Make Ebl2/Vrm2]

    [CCRP EBL/VRM] menu This context menu is used to operate EBL/VRM using the ship position as the measurement base point. The following menu items are available. • Make EBL1/VRM1 • Make EBL2/VRM2 • Make EBL1 • Make EBL2 • Make VRM1 •...

  • Page 63: Operation Via [Dropped Ebl/Vrm] - [Make Vrm1] Or [Make Vrm2]

    3.2.3 Operation via [Dropped EBL/VRM] - [Make VRM1] or [Make VRM2] Operations are common in VRM1 and VRM2. The following description is based on VRM1. Right-click on the chart to display the context menu. Select [Dropped EBL/VRM] - [Make VRM1] from the context menu. VRM1 is displayed and the measurement base point is displayed on the cursor.

  • Page 64: Operation Via [Ccrp Ebl/Vrm] - [Make Ebl1] Or [Make Ebl2]

    3.2.6 Operation via [CCRP EBL/VRM] - [Make EBL1] or [Make EBL2] Operations are common in EBL1 and EBL2. The following description is based on EBL1. Right-click on the chart to display the context menu. Select [CCRP EBL/VRM] - [Make EBL1] from the context menu. EBL1 is displayed and the measurement base point is displayed on the ship.

  • Page 65: Displaying The Ebl/Vrm Button

    3.3 Displaying the EBL/VRM Button The EBL/VRM button is used to create and configure EBL/VRM. In plotter mode, the EBL/VRM button is displayed on the [EBL/VRM readout] dialogue. The following describes how to display the [EBL/VRM readout] dialogue. Procedure Use the following operation to display the [EBL/VRM readout] dialogue. [Menu] button →...

  • Page 66: Displaying The [Curs Info] Dialogue

    3.4 Displaying the [CURS INFO] Dialogue Move the cursor in the chart to change it to the cross-hair cursor. The [CURS INFO] dialogue displays information of the cursor position. Procedure Use the following operation to display the [CURS INFO] dialogue. [Menu] button →...

  • Page 67: Setting The Base Point For Curs Info

    (6) Cursor distance display unit Click on the button to change the unit to display the cursor distance. The unit changes between [NM], [km], and [sm]. [NM]: The distance is displayed in NM units. [km]: The distance is displayed in km units. [sm]: The distance is displayed in sm units.
  • Page 68 3.4.1.2 Moving to the configured base point On the [Edit Reference Mark] dialogue, click on the reference mark number to move to and click on the [Jump] button. The chart is centred on the selected base point. 3.4.1.3 Deleting the configured base point On the [Edit Reference Mark] dialogue, click on the reference mark number to delete and click on the [Delete] button.

  • Page 69: Section 4 Route Planning

    Section 4 Route Planning Ship routes can be created and edited in Route Planning. 4.1 Overview of the Destination Route Destination routes can be created if the optional plotter is installed on the JMR-5400 series ship radar equipment. 4.1.1 Flow of destination route creation The flow of destination route creation is as follows.

  • Page 70: Editing The Destination Route

    4.1.2 Editing the destination route The destination route setting can be edited. The following table lists the items that can be edited. Setting Overview and reference Turns on/off the proposed destination number and comment display. Text display ON/OFF 4.2.1 Configuring [View] - [WPT/Route] from the Proposed menu destination...

  • Page 71: Route Display Settings

    4.2 Route Display Settings Configure the route display setting before creating a route. 4.2.1 Configuring [View] - [WPT/Route] from the menu Configure the route display settings on the [WPT/Route] dialogue of the [View] menu. Procedure Use the following operation to display the [WPT/Route] dialogue on the Edit pane of the [View] dialogue.

  • Page 72: Opening The [Route/Destination] Dialogue

    4.3 Opening the [Route/Destination] Dialogue The [Route/Destination] dialogue is used to register proposed destination, create and edit a route. Procedure Use the following operation to open the [Route/Destination] dialogue. [Menu] button → Route Planning → Set Route/Destination The following describes input fields and buttons for creating and editing a route on the [Route/Destination] dialogue.

  • Page 73: Key Assignment On The Operating Unit

    (start point) button To create or edit a route, enter a number in the [No.] field and then click on the start point button. (end point) button Click on it to determine the creation/edit of the route. 4.3.1 Key assignment on the operating unit The functions of the above buttons of the [Route/Destination] dialogue are assigned to the keys of the operating unit as described in the following table.

  • Page 74: Creating A New Destination Route

    4.4 Creating a New Destination Route Create and register proposed destinations and connect them by legs to create a new destination route. 4.4.1 Registering a new proposed destination Procedure Use the following operation to open the [Route/Destination] dialogue. [Menu]button → Route Planning → Set Route/Destination You can also open the [Route/Destination] dialogue by pressing the destination key on the operating dialogue.

  • Page 75: Creating A New Destination Route

    4.4.2 Creating a new destination route Connect registered proposed destinations by legs to create a new destination route. A new route can be created on the [Route/Destination] dialogue or the [Route List] dialogue. 4.4.2.1 Creating a route on the [Route/Destination] dialogue Use the following operation to open the [Route/Destination] dialogue.
  • Page 76 4.4.2.2 Creating a route on the [Route List] dialogue Routes can be created and edited on the [Route List] dialogue. Opening the [Route List] dialogue Use the following operation to open the [Route List] dialogue. [Menu] button → Route Planning → Route List (1) [Route No.] input field Enter the number for the destination route to create or edit.
  • Page 77 (5) [] (close) button Click on this button to determine the route and exit the creation process. (6) Display area switching buttons Use these buttons to change or scale up/down the display area as needed. (a) [Previous] button Returns to the previous display area or scale. (b) [Display centred WPT] button WPT being edited is displayed in the centre of the chart.
  • Page 78 Creating a new destination route Open the [Route List] dialogue and operate it as follows. Enter the number for the new destination route in the [Route No.] field. Enter the first proposed destination number in line 1 of the Route List. To refer to the [Destination List] dialogue, click on the [Destination List] dialogue button.

  • Page 79: Editing Proposed Destinations

    4.5 Editing Proposed Destinations The [Destination List] dialogue lists the proposed destinations registered. On this dialogue, proposed destinations can be edited or created. 4.5.1 Edit on the [Destination List] dialogue Use the following operation to open the [Destination List] dialogue. [Menu] →...
  • Page 80 4.5.1.1 Adding a new proposed destination Open the [Destination List] dialogue and operate it as follows. On a proposed destination row where the latitude and longitude are not determined, click on the [LAT] field. Enter the latitude using the software keyboard. When the latitude is entered, the longitude can be entered.
  • Page 81 4.5.1.5 Deleting a proposed destination Open the [Destination List] dialogue and operate it as follows. Click on the number for the destination you want to delete. Click on the [Delete] button. The selected destination will be deleted. Click on the [] button to close the [Destination List] dialogue. 4-13 Section 4 Route Planning...

  • Page 82: Editing The Destination Route

    4.6 Editing the Destination Route Destination routes can be edited. Use the [Route/Destination] dialogue or the [Route List] dialogue to edit the route. Memo The routes being monitored cannot be edited. 4.6.1 Edit on the [Route/Destination] dialogue 4.6.1.1 Opening the [Route/Destination] dialogue Procedure Use the following operation to open the [Route/Destination] dialogue.

  • Page 83: Edit On The [Route List] Dialogue

    4.6.1.4 Deleting the specified destination route In the [No.] field, enter the number for the destination route you want to edit. Click on (Start point button). Or press the start point key on the operating unit. Example: When 99 is entered The title bar of the [Route/Destination] dialogue changes to [Route(99)].

  • Page 84: Creating A Temporal Route

    4.7 Creating a Temporal Route A temporal route is not saved as a file but can be used for route monitoring. Route monitoring starts automatically when a temporal route is created. While destination routes are created on the [Route/Destination] dialogue, temporal routes are created via key operations on the operating unit without opening the [Route/Destination] dialogue.

  • Page 85: Creating A Goto Route (Temporal Route Between Two Points)

    4.8 Creating a GoTo Route (Temporal Route Between Two Points) The GoTo route is a temporal route connecting the ship position and the specified point. Route monitoring starts automatically when a GoTo route is created. In the same way as temporal routes, GoTo routes are created via key operations on the operating unit without opening the [Route/Destination] dialogue.
  • Page 86 Section 4 Route Planning 4-18...

  • Page 87: Section 5 Route Monitoring

    Section 5 Route monitoring 5.1 About Route Monitoring The route monitoring function monitors the ship position, bow and speed, and calculates the estimated time of arrival based on the route created in route planning. Memo The destination route must be created before using the route monitoring function. For details of Route Planning, see Chapter 4 Route Planning.
  • Page 88 5.1.1.2 Starting route monitoring on the [Route/Destination] dialogue Use the following operation to open the [Route/Destination] dialogue. [Menu] button → Route Planning → Set Route/Destination Memo The [Route/Destination] dialogue is also used for creating and editing a route. For details, see 4.3 Opening the [Route/Destination] dialogue. In the [No.] field, enter the number for the destination route to be monitored.

  • Page 89: Ending The Route Monitoring

    5.1.2 Ending the route monitoring 5.1.2.1 When route monitoring is started from the [Route Monitoring] dialogue When route monitoring is started from the [Route Monitoring] dialogue, Use the following operation to end the route monitoring. Activate the [Route Monitoring] dialogue that is behind the [Voyage Information] dialogue.

  • Page 90: Route Monitoring Settings

    5.2 Route Monitoring Settings Route monitoring settings can be configured on the [WPT/ROUTE] dialogue of the [View] menu or the [Route] dialogue of the [Settings] menu. 5.2.1 Configuring [View] - [WPT/ROUTE] from the menu Procedure Use the following operation to display the [WPT/ROUTE] dialogue in the Edit pane of the [View] dialogue.

  • Page 91: Configuring [Settings] - [Route] From The Menu

    5.2.2 Configuring [Settings] - [Route] from the menu Procedure Use the following operation to display the [Route] dialogue in the Edit pane of the [Settings] dialogue. [Menu] button → Settings → Route The following table lists the setting items of the [Route] dialogue. Setting item Description Setting value...

  • Page 92: Voyage Information] Dialogue

    5.3 [Voyage Information] Dialogue The [Voyage Information] dialogue opens when route monitoring starts. This dialogue displays information of the route being monitored. Extending and shrinking the dialogue The [Voyage Information] dialogue can be extended or shrunken as needed. The dialogue box is shrunken when the route monitoring starts. To extend the dialogue, click on the extend button ( To shrink the dialogue, click on the shrink button ( The following table lists and describes the setting items of the [Voyage Information] dialogue.
  • Page 93 Item Display content and operation Display/input range The following icons are displayed depending on the setting of the [Alert] menu. : The destination arrival alert is not selected. : The destination arrival alert is selected but no alert is occurring. Destination : The destination arrival alert is selected and an arrival/leaving...

  • Page 94: Reversing The Route

    5.4 Reversing the Route The direction of the route being monitored can be reversed. When it is reversed, the WPT next to the start point after the reversal becomes new To WPT. The reversed state is retained even after the power supply is turned off. The reversed state is cancelled when another route monitoring is started.

  • Page 95: Changing The To Wpt

    5.5 Changing the To WPT The To WPT for the route being monitored can be changed. 5.5.1 Changing to WPT using the [Route Monitoring] dialogue 5.5.1.1 When route monitoring is started from the [Route Monitoring] dialogue When route monitoring is started from the [Route Monitoring] dialogue, Use the following operation to change the To WPT.
  • Page 96 Section 5 Route monitoring 5-10...

  • Page 97: Section 6 Settings

    Section 6 Settings 6.1 Chart Settings 6.1.1 Registering/displaying my Ports Any port in the chart can be registered on My Port List. To display a registered port, select a port name from My Port List. 6.1.1.1 Registering a port Procedure Centre the chant on the place you want to register as My Port.

  • Page 98: Displaying The Chart By Inputting The Position

    6.1.1.3 Deleting a port Procedure Use the following operation to display the [My Port List] dialogue. [Menu] button → Chart → My Port List The following table describes operations of the [My Port List] dialogue. Setting item Description Setting value Select a list you want to delete by clicking on it.

  • Page 99: Screen Display Settings

    6.2 Screen Display Settings 6.2.1 Configuring the ship symbol display Configure the own ship symbol display setting. Procedure Use the following operation to display the [Own Ship] dialogue in the Edit pane of the [View] dialogue. [Menu] button → View → Own Ship The following table lists the setting items available in plotter mode.

  • Page 100: Configuring The Own Track Display

    6.2.2 Configuring the own track display Configure the own track display. Own track information is saved in SSD every second. Track information of up to 24 hours is displayed on the chart. Procedure Use the following operation to display the [Own Track] dialogue in the Edit pane of the [View] dialogue. [Menu] →...
  • Page 101 [Plot] tab (normal track) The following table lists the settings when [Standard] is selected for [Track type] on the [Plot] tab. Setting item Description Setting value Select a type of own track. Standard: Normal track. It can be displayed without the plotter option. For the case when [Depth] is selected, see Standard / Depth / [Track type] combo box...
  • Page 102 [Plot] tab (depth track) The following table lists the settings when [Depth] is selected for [Track type] on the [Plot] tab. Setting item Description Setting value Select a type of own track. Depth: Selectable if the optional plotter and depth sounder are installed. [Track type] combo The depth value is displayed next to the track.
  • Page 103 [Plot] tab (temperature track) The following table lists the settings when [Temperature] is selected for [Track type] on the [Plot] tab. Setting item Description Setting value Select a type of own track. Temperature: Selectable if the optional plotter and thermometer are installed. [Track type] combo The depth value is displayed next to the track.

  • Page 104: Configuring The Tt/Ais Target Display

    [Clear] tab The following table lists the setting items of the [Clear] tab. Setting item Description Setting value All / White / Grey / Amber / Magenta / [Track Colour] Specify the own track colour to delete the own track. Blue / Cyan / Green / combo box Yellow / Orange / Dark...

  • Page 105: Configuring The Distance/Direction Measuring Function Display

    6.2.4 Configuring the distance/direction measuring function display Procedure Use the following operation to display the [Tools] dialogue in the Edit pane of the [View] dialogue. [Menu] button → View → Tools The following table lists the setting items available in plotter mode. Setting item Description Setting value...

  • Page 106: Configuring Display Of The Sub Information Area

    6.2.5 Configuring display of the sub information area Configure display of the sub information area. Procedure Use the following operation to display the “Control” dialogue in the Edit pane of the [View] dialogue. [Menu] button → View → Control The following table lists the setting items available in plotter mode. Setting item Description Setting value...

  • Page 107: Alert Settings

    6.3 Alert Settings 6.3.1 Configuring the alerts for the destination route When using destination routes, configure the conditions for issuing alerts. Alerts regarding arrival at the destination and alerts regarding leaving from the route are available. Procedure Use the following operation to display the [Route] dialogue in the Edit pane of the [Alert] dialogue. [Menu] button →...

  • Page 108: Operating Mode Settings

    6.4 Operating Mode Settings 6.4.1 Configuring the basic settings of radar signal processing Configure the basic processing of radar signals. Procedure Use the following operation to display the [Signal Process(Basic)] dialogue in the Edit pane of the [Settings] dialogue. [Menu] button → Settings → Signal Process(Basic) The following table lists the setting items of the [Signal Process(Basic)] dialogue.

  • Page 109: Configuring The Scale And Range

    6.4.2 Configuring the scale and range Configure the scales and ranges that can be selected from the Scale/Range combo box in the chart information area. Procedure Use the following operation to display the [Scale/Range Preset] dialogue in the Edit pane of the [Settings] dialogue.
  • Page 110 [Range] tab Setting item Description Setting value When the unit is NM/sm: Enter a range value you want to add. [Range] field 0.125 to 96.000 The configured range unit is used. When the unit is km: 0.15 to 128.00 Click on this button to add the range input in the [Add] button.
  • Page 111 Default values of scales and ranges Range Scale Unit: NM/sm Unit: km 1/1,000 0.125 0.15 1/2,000 0.25 0.30 1/4,000 0.500 0.50 1/7,500 0.750 0.80 1/15,000 1.500 1.20 1/30,000 3.000 1.60 1/50,000 6.000 2.00 1/100,000 12.000 4.00 1/200,000 24.000 8.00 1/400,000 48.000 16.00 1/750,000...

  • Page 112: Configuring The Chart Operation

    6.4.3 Configuring the chart operation Set chart operation. Procedure Use the following operation to display the [Chart] dialogue in the Edit pane of the [Settings] dialogue. [Menu] button → Settings → Chart Setting Item Description of Setting Setting Value Border Range Set up the range for the own ship in order to move the chart.

  • Page 113: Configuring The Current Position Display

    6.4.4 Configuring the current position display Select LAT/LON, LORAN C, LORAN A, or DECCA to display the current position. Procedure Use the following operation to display the [Position Display] dialogue in the Edit pane of the [Settings] dialogue. [Menu] button → Settings → Position Display The following table lists the setting items of the [Position Display] dialogue.
  • Page 114 Setting item Description Setting value [DECCA] tab 0/1/2/4/11/12/20/22/24/ 31/34/40/41/42/44/51/ [Chain] combo Select a master station (chain). 52/55/60/61/62/64/71/ 72/73/74/80/81/82/84/ 91/92/94 [LOP1] combo Set the zone of slave station 1. 0 to 9 box (zone) [LOP1] combo Set the lane of slave station 1. A to J box (lane) [LOP1] field...

  • Page 115: Setting The Colour And Brightness

    6.4.5 Setting the colour and brightness Set the color and the brightness of the display contents. Procedure Use the following operation to display the [Colour and Brightness] dialogue in the Edit pane of the [Settings] dialogue. [Menu] button → Settings → Colour and Brightness [Display Colour] tab Setting item Description...

  • Page 116: Setting The Key Assignment

    6.4.6 Setting the key assignment Set the keys on the operation unit and the functions that are assigned to the [MULTI] dial. Only the items whose functions are available on the mode screen are displayed on the screen. [Operation procedure] Open the key assignment setting screen by performing the following menu operations.
  • Page 117 Function Description Clear Mark/Line Clear a mark/line. Select the mark/line on the setting screen that is displayed by pressing the [Detail] button. Plot Event Mark Enter an event mark on the own ship’s position. Select the event mark on the setting screen that is displayed by pressing the [Detail] button. Plot Mark Enter a mark on the cursor position.

  • Page 118: Configuring User Preferences

    6.4.7 Configuring user preferences Main operations and setting information in radar mode, synthesis mode, and plotter mode can be saved and invoked collectively. Procedure Use the following operation to display the [Preference] dialogue in the Edit pane of the [Settings] dialogue.
  • Page 119 To delete user preference Select a user preference you want to delete and click on [Delete] button. A confirmation dialogue is displayed. Up to 64 characters can be displayed for the file name. An ellipsis [...] is added to the end if the text is longer than the field width. Click on the [OK] button.
  • Page 120 Radar mode Preference to be saved Default setting or value after [Default display Save item Location Item configurations] is clicked on • Receiving sensitivity adjustment value (Gain) • Sea clutter adjustment value (Sea) Gain and Radar screen • Sea clutter removal anti-clutter - Radar signal mode...
  • Page 121 Radar mode Preference to be saved Default setting or value after [Default display Save item Location Item configurations] is clicked on PI (parallel index) • Display ON/OFF: OFF • Display ON/OFF • Control right: • Control, measurement • Bearing value: 0°...
  • Page 122 Radar mode Preference to be saved Default setting or value after [Default display Save item Location Item configurations] is clicked on • AZ1 function ON/OFF • AZ1 function ON/OFF: OFF • AZ1 Start Angle • AZ1 Start Angle: 315.0° • AZ1 End Angle •...

  • Page 123: Section 7 Specifications

    Section 7 Specifications 7.1 Plotter Functions FUNCTIONAL SPECIFICATIONS Projection Mercator projection (Latitude 85 degree or less) Scale Synchronise range scale (Synthesis mode) 1/1,000 ~ 1/30,000,000 are continuously selected. 15 stage can be changed (preset can be used). (Plotter mode) Position correction Latitude / Longitude correction Radar video synchronise range scale coast line by manual.
  • Page 124 Section 7 Specifications...

  • Page 125: Appendix A Alert List

    Appendix A Alert List When an alert occurs, alert information is displayed in the alert notification area. Caution button Warning button Alarm button Alert message The numbers displayed in the buttons indicate the number of such alerts that have occurred. Memo The alert button of a category that has not occurred will not be displayed.

  • Page 126: Alarms

    The list of alert messages by alert type is shown below. A.1 Alarms Message Explanation Collision avoidance function lost The collision avoidance function cannot be executed due to a failure or a communication error of sensor or radar antenna. CPA/TCPA(AIS) CPA/TCPA alarm (AIS) CPA/TCPA(TT) CPA/TCPA alarm (TT)

  • Page 127: Warnings

    A.2 Warnings Message Explanation AIS ACT Max The AIS activation target count has reached the maximum activation target count. AIS(invalid) There is a format error or a status error of the AIS data. AIS(unavailable) The AIS data cannot be received. AIS Max Target The AIS target count has reached the maximum target display count.
  • Page 128 Message Explanation Heading(invalid) There is a format error or a status error of the Heading data. Heading(not plausible) There is a range error of Heading data. Heading(unavailable) The Heading data cannot be received. ISW(Communication error) There is a communication error with ISW. LAT(Out Of Bounds) The ship is out of the system operating latitude range.
  • Page 129 Message Explanation RADAR Alarm(In) Echo whose level is at the threshold value or more occurred at the alarm area. RADAR Alarm(Out) Echo whose level is at the threshold value or more has disappeared at the alarm area. RADAR PROC(Data) Control of radar signal/image processing failed. RPU Fan The RPU unit fan revolution per minute has been decreased.
  • Page 130 Message Explanation TXRX(MHV) The supply voltage to the magnetron in the radar antenna is abnormal. TXRX(MON COM) Communication with PM circuit in the radar antenna cannot be performed. TXRX(MON Oscillator) The oscillator with PM circuit in the radar antenna is abnormal. TXRX(MON Temperature) The temperature of PM circuit in the radar antenna is abnormal.
  • Page 131 Message Explanation TXRX(RX Video Level) The video level from RX circuit in the radar antenna is abnormal. TXRX(Trigger) There is possibility that timing reference signals are not normally output from the radar antenna. TXRX(TX Connection ) The connection of TX circuit in the radar antenna is abnormal.
  • Page 132 The AIS alerts received from external sensors are as shown below. For the AIS alerts received from external sensors, alert messages are suffixed by (External). Example: Antenna VSWR exceeds limit (External) Message Subject Explanation Alert ID Antenna VSWR exceeds limit Antenna output error Data Flash memory err Transponder data storage circuit error...

  • Page 133: Cautions

    Cautions Message Explanation AIS 95% Capacity The target number of AIS has reached 95% of the acceptable amount. AIS ACT 95% Capacity The activation target number of AIS has reached 95% of the acceptable amount. COG/SOG(invalid) There is a format error or a status error of the COG/SOG data.

  • Page 134: List Of Alert Icons

    A.4 List of Alert Icons The alert icons displayed in the alert status area are listed below. Name of alert icon Functional outline Alert icon Active – A flashing red triangle. unacknowledged A symbol of loudspeaker in the middle of the triangle. alarm A flashing red triangle.

  • Page 135: Appendix B Menu List And Materials

    Menu List and Materials Appendix B B.1 Menu List This section shows the menus and dialogue items of this equipment by target menu. * Items that are enclosed by a frame of broken lines indicate the dialogue and window names that are displayed by selecting the relevant menu.

  • Page 136: Route Monitoring (Destination Route

    B.1.2 Route Monitoring (Destination Route) Route Monitoring Route No. [List: Route list] Select Route Route No. / Comment Open To WPT Expand Voyage Information Standard Route To WPT DIST Switching UTC/LMT Comment Unload B.1.3 Route Monitoring (NMEA) Route Monitoring DIST UTC / LMT Appendix B Menu List and Materials...

  • Page 137: Anchor Watch

    B.1.4 Anchor Watch Anchor Watch Monitoring Anchor Mode [Mode: Circl] Position (LAT) (LON) Radius [Mode: Polygon] Point (total: x) [List: Point list] No. / LAT / LON B.1.5 Chart Chart My Port List My Port List Save [List: My port list] Name / LAT / LON / Scale Delete Jump...

  • Page 138: User Map

    B.1.6 User Map User Map File Operation Delete Copy Merge Display Files [List: User map file list] Display / Editing / Name / Count / Comment / Date (UTC) / Geodetic Edit User Map Mark/Line List [Tab]Mark [List: Object list] No.

  • Page 139: Tt/Ais

    B.1.7 TT/AIS TT/AIS AIS Voyage Data Destination [Combo box] ETA (UTC) Calendar picker NAV Status Draft Cargo Cat. Persons On − Board Send Edit and Send AIS Message [Send to] Addressed MMSI Name Target ID Broadcast Category LL & Time View Tray Message Save...
  • Page 140 TT/AIS Highlighting Highlighting by the Following Search Criteria [Tab]TT/AIS Transit Direction [Combo box] Transit Direction TCPA (MIN − MAX) TCPA (MIN) TCPA (MAX) CPA (MIN − MAX) CPA (MIN) CPA (MAX) SOG (MIN − MAX) SOG (MIN) SOG (MAX) Same Fleet [Settings] Preset of Same Fleet −...
  • Page 141 TT/AIS TT/AIS List [RADAR Mode] [Tab]TT List BRG/RNG LAT/LON [List: BRG/RNG selected] ID / CPA / TCPA / BCR / BCT / COG/CTW / SOG/STW / BRG / RNG / Status [List: LAT/LON selected] ID / CPA / TCPA / BCR / BCT / COG/CTW / SOG/STW / LAT / LON / Status [Tab]AIS List COG/SOG/Name/Call Sign/ MMSI/Source...
  • Page 142 TT/AIS Own Ship AIS Data Name Call Sign MMSI IMO No. Length Beam Destination ETA (UTC) Navigation Status Draft Type of Ship Cargo Category COG or CTW SOG or STW Heading Position Position Accuracy Position Sensor Last Lost AIS Target Name Call Sign MMSI...

  • Page 143: Tools

    B.1.8 Tools Tools Position (LAT) (LON) Bearin Range Unit switching button Time EBL / VRM Origin position of EBL1/VRM1 Origin position of EBL2/VRM EBL1 EBL2 EBL Bearing reference VRM1 VRM2 VRM Distance unit Display for All Lines Mode [Mode: All] PI Bearing Interval Unit switching button...
  • Page 144 Tools EBL Manoeuvre Display Manoeuvre curve Course T Reach [Turn Set] Radius [Text box] Radius Rate [Text] Rate Manual Position Fix [Tab]Position Offset [Position] Offset Clear Offset Offset Enter Offset (LAT) (LON) Position Enter Position (LAT) (LON) Cursor Readout Select reference mark Bearing Range LAT / LON...
  • Page 145 Tools File Manager [Tab]File Management File Type Drive [List: Folder Tree] [List: File list] Name Copy >> << Copy Delete Drive [List: Folder Tree] [List: File list] Name Delete [Tab]File Load/Save File Type [List: File list] Name [File Type: Own Track] Load Mode Load Save Current Own Track...

  • Page 146: View

    B.1.9 View View Own Ship (Page 1/2) Type Blink Interval Stern Line (RADAR Mode) Heading and Beam Line (Plotter Mode) [Vector] Ground stabilised Vector Sea stabilised Vector Time Stabilisation indicator Vector Time Mark Interval Next (Page 2/2) [Settings] − [Filter] Settings of AIS Filter [Alert] Settings of AZ...
  • Page 147 View Own Track [Tab]Plot Track Type [Track Type: Standard] [Own Track Plot] Plot Colour Plot Interval [Time Lable] Plot Interval [Tools] File Load/Save − [File Manager] [Track Type: Depth*] − [File Load/Save] [Own Track Plot] Grey − Blue Blue − Cyan Cyan −...
  • Page 148 View User Map (Page 1/2) [Object Type] All On Individual <Individual selected> Mark Line Text Next (Page 2/2) [Mark/Line Colour] White/Black Grey Amber Mgenta Blue Cyan Green Yellow Orange Dark Red Mark Size [Comment Font Size] Standard Small Back RADAR Overlay RADAR RADAR Overlay Source Selection Tranparency of Echo/Trails...
  • Page 149 View Target Track [Tab]Display [Target Track Display] All On All Off Individual <Individual selected> Track1 Track 2 Track 10 Track 11 to 20 Track 21 to 30 Track 91 to 100 File Load/Save [Tools] − [File Manager] − [File Load/Save] [Plot Colour] [Tab]Plot For All Target Track...
  • Page 150 View Chart View Multi View Mode [Multi View Mode] [Chart Type] Single View C − MAP MAX Top − Bottom newpec Right − Left Display Fishing Area Select Area from View1 for View2 C − MAP MAX (Page 1/4) [Depth Shading] Mode [Highlight Depth Area] Minimum Depth...
  • Page 151 View newpec [Tab]Contour (Page 1/2) Safety Contour Contour Display Shallow Contour Deep Contour Contour Interval Line Type [Contour Colour] Colour Mode [Colour Mode: Simple Colour] Colour Next (Page 2/2) [Highlight Depth] Contour [Combo box] Delete [List: Contour list] Contour / Colour / Line Type Back Name [Tab]Chart...
  • Page 152 View Unit Depth Depth(C − MAP MAX) Current Speed Wind Speed Air TEMP Water TEMP Air Pressure Wind Direction (True) [Range Unit AUTO Selection] Range Threshold Use same unit for Cursor/VRM/PI Control (Page 1/4) [Top Level Screen Information] [RADAR Mode] Show Own Track Control [Plotter Mode] Show Sube Information Window...

  • Page 153: Alert

    B.1.10 Alert Alert Collision Avoidance [CPA/TCPA Alarm] CPA Limit TCPA Limit [Alart Detection] Lost Warning Lost Detection Limit AIS CPA/TCPA Alarm New Target Alarm Use AZ1 Use AZ2 Make AZ1 [Tab]1 Start Angle End Angle Start Distance End Distance [Tab]2 Same ad [Tab]1.

  • Page 154: Settings

    Alert Position Integrity [Position monitor warning] Position Difference Limit Radius Limit (GPS) Radius Limit (DGPS) Time Limit [HDOP exceeded caution] HDOP Limit [Reactivation of Silenced Alert] Time Limit [Transfer to BNWAS] Time Limit [Repetition of UNACK Warning] Time Limit B.1.11 Settings Settings Signal Process (Basic) Gain...
  • Page 155 Settings Obs. Scene Preset (Common) Obs. Scene (Page 1/6) Target Enhance Echo Process Rain AUTO Change H − Up Next (Page 2/6) 0.75 (0.75 to 1.5) 1.5 (1.5 to 3) NM 3 (3 to 6) NM 6 (6 to 12) NM 12 (12 to 16) NM Back Next...
  • Page 156 Settings Obs. Scene Common [AUTO Change Obs. Scene] Short Short (Maximum) MID (Maximum) Long [Obs. Scene] Short Long Trails Mode Trails Trails Ref Level Trails Reduction MAX Length Time/All Combine Trails Masking [Show Trails Masking Area] Expand Masking Size Def. TXRX PRF Fine Tuning Stagger Trigger...
  • Page 157 Settings Association Association Priority [Threshold] Bearing Range Course Speed Applicable AIS Target Ship’s Dynamic Trait Reach Turn Mode [Turn Set] [Turn Mode: Radius] Radius [Turn Mode: Rate] Rate Acceleration Deceleration [Tab]TT [List: Same Fleet list] Preset of Same Fleet No. / Target ID Delete [List: Same Fleet list] [Tab]AIS...
  • Page 158 Settings Route Route Mode (Destination Route) WPT Switching Mode Save Temporary Route Scale/Range Preset [Tab]Scale Scale Delete Def. [List: Scale list] No. / Scale [Tab]Range Range Delete Def. [List: Range list] No. / Range Chart [Redraw] Border Range NAVTEX Show NAVTEX [Highlighting of Message List] Navigation Alarm Weather Alarm...
  • Page 159 Settings Postion Display Mode [Tab]LORAN C Chain TD1 Correction TD2 Correction LOP 1 [Tab]LORAN A TD1 Correction LOP 2 TD2 Correction [Tab]DECCA Chain [Combo box]LOP1 (Zone) [Combo box]LOP1 (Lane) [Text box]LOP1 (Frequency) TD1 Correction [Combo box]LOP2 (Zone) [Combo box]LOP2 (Lane) [Text box]LOP2 (Frequency) TD2 Correction [NSK]...
  • Page 160 Settings [GPS Ver. R26.01~R30.99] [Position] [Exclusion Satellite] Exclusion Satellite 1 Exclusion Satellite 2 Exclusion Satellite 3 Exclusion Satellite 4 Exclusion Satellite 5 Exclusion Satellite 6 Geodetic Datum Antenna Height Fix Mode DOP Level Position Averasing Elevation Mask Master Reset Send Data Status [GPS Ver.
  • Page 161 Settings [GPS Ver. R40.00~] [Position] Geodetic Datum Antenna Height Fix Mode DOP Level [Position Averasing] Position Speed Course Elevation Mask RAIM Level [GNSS](* In case of there is a satellite type) QZSS GLONASS Master Reset Send Data Status DGPS Select Station Frequency Bit Rate DGPS Mode...
  • Page 162 Settings Colour and Brightness Day/Night Def. [Tab]Display Colour (Page 1/2) Outer PPI (RADAR Mode) Dialogue (Plotter Mode) Inner PPI Charcter RADAR Video RADAR Video (Small Target Highlight) RADAR Trails (Time) RADAR Trails (All) Target Symbol [Target Symbol: Detail Individual] No.1 MID No.1 Colour No.2 MID No.2 Colour...
  • Page 163 Settings Key Assignment [Tab]User Keys DISP Off Key User Key 1 Detail User Key 2 Detail User Key 3 Detail User Key 4 Detail User Key 5 Detail User Key 6 Detail User Key 7 Detail User Key 8 Detail User Key 9 Detail User Key 10...

  • Page 164: Maintenance

    B.1.12 Maintenance Maintenance Date/Time/Time Zone [Date] Month  /  Year  /  Date (Calender) Time (LMT) Time Zone Display Style Synchronise with Time Source (Date/Time) Synchronise with Time Source (Time Zone) System Information [Tab]Software [List] Application Maintenance No. TXRX No.1 GPS No.2 GPS...
  • Page 165 Maintenance Operating Time [Operating Time to Display Unit] Total LCD FAN RPU FAN [Operating Time to Scanner Unit] Total Transmit Motor FAN (PS FAN / TX FAN) Voyage Distance [Current Voyage Distance] Ground Water Clear Sensor Selection / Status Sensor Selection [Sensor Selection] [Position] [Combo box]...

  • Page 166: Help

    Maintenance Diagnosis MON Check [In case of connected new scanner unit] TX Level RX Level [In case of connected current model magnetron scanner unit] [Transmitter System] Attenuation Value [Receiver System] MON Pattern Range Attenuation Value MON Check (SSR) [In case of connected solid − state scanner unit] TX Level RX Level RADAR INFO...

  • Page 167: Service

    B.1.15 Service Service Adjustment Basic Adjustment Tune Adjustment Tune Adjustment Mode Bearing Adjustment Range Adjustment Master Slave TXRX Antenna Height Tune Peak Adjustment Tune Indicator Output BP [In case of connected current model magnetron scanner unit] MON Adjustment MON Indicator Adjustment MON Level [In case of connected new scanner unit] TX Monitor Adjustment...
  • Page 168 Service Adjustment Vector Constant VD Level (Manual) VD Level (AUTO) Gate Size Limit Ring Initial Level Area Offset Installation System Configuration CCRP Length Beam GPS1(X) GPS1(Y) GPS2(X) GPS2(Y) GPS3(X) GPS3(Y) GPS4(X) GPS4(Y) Scanner Unit1(X) Scanner Unit 1(Y) Scanner Unit 2(X) Scanner Unit 2(Y) Scanner Unit 3(X) Scanner Unit 3(Y)
  • Page 169 Service Installation System Serial Port [Tab]RPU [Combo box]GPS Configuration GPS − Detail GPS − Monitor Gyro Compass [Combo box] Gyro Compass [NSK selected] Heading Sensor Gyro Compass − Detail Gyro Compass − Monitor [Combo box]CH1 CH1 − Detail CH1 − Monitor [Combo box]CH2 CH2 −...
  • Page 170 Service Installation Ship’s Paramaters Ship’s Name Length Beam Keel − Trans MAX Speed Limit Settings Setting Password Maintenance Information [Tab]Storage [Drive Information] Drive / Total / Free [File Information] File / Usage [Tab]Hardware MAC Address RADAR Safety Switch [In case of connected new scanner unit] Clear TX Time Clear Motor Time Clear PS FAN Time...
  • Page 171 Service Maintenance Initialisation [Initialisation (All settings except service)] Set Default [Initialisation (Service setting)] Set Default Settings Backup Main Drive C: >> (Text box) Browse Backup 付録 D B-37 Appendix B Menu List and Materials...

  • Page 172: Context Menu List

    B.2 Context Menu List This section shows the context menus that are displayed by clicking the right button by target object. *[Acquire] is a menu item displayed only radar mode and synthesis mode. B.2.1 No object (RADAR/Synthesis mode) Acquire Acquire and Readout Information Cancel All TT –...

  • Page 173: Ais

    B.2.3 B.2.3.1 Sleeping AIS target Activate Deactivate mode Readout information... Readout detail information... – – – – – – – – – – – – – – – – – – Property… – – – – – – – – – – – – – – – – – – Message Send message to this target…...
  • Page 174 B.2.3.3 Numeric displayed AIS target Cancel information readout Deactivate mode Readout detail information... – – – – – – – – – – – – – – – – – Property… – – – – – – – – – – – – – – – – – Message Send message to this target…...
  • Page 175 B.2.3.6 Sleeping AIS - SAR ship target Activate Deactivate mode Readout information... Readout detail information... – – – – – – – – – – – – – – – – – Property… – – – – – – – – – – – – – – – – – Message Send message to this target…...
  • Page 176 B.2.3.8 Numeric displayed AIS - SAR ship target Cancel information readout Deactivate Readout detail information... – – – – – – – – – – – – – – – – – Property… – – – – – – – – – – – – – – – – – Message Send message to this target…...
  • Page 177 B.2.3.11 Numeric displayed AIS - SART target Cancel information readout Deactivate mode Readout detail information... – – – – – – – – – – – – – – – – – Property… – – – – – – – – – – – – – – – – – Message Send message to this target…...
  • Page 178 B.2.3.14 Normal AIS - BS target Readout information... Readout detail information... – – – – – – – – – – – – – – – – – Property… – – – – – – – – – – – – – – – – – Message Send message to this target…...

  • Page 179: B.2.4 Tt

    B.2.4 B.2.4.1 Internal TT Readout information... Cancel TT Cancel all TT Cancel TT mode – – – – – – – – – – – – – – – – – Property... – – – – – – – – – – – – – – – – – Mask Trails [before mask] [after mask]...

  • Page 180: Gps Buoy

    B.2.5 GPS Buoy B.2.5.1 Normal GPS Buoy target Cancel GPS Buoy... Readout information... – – – – – – – – – – – – – – – – – Property... – – – – – – – – – – – – – – – – – Acquire* –...

  • Page 181: User Map

    B.2.7 User Map B.2.7.1 Mark Move this object Delete this object – – – – – – – – – – – – – – – – – – Show Mark/Line List... – – – – – – – – – – – – – – – – – – Acquire* –...
  • Page 182 B.2.7.4 Line (Line segment) Insert vertex – – – – – – – – – – – – – – – – – – Select All Move this object Delete this object – – – – – – – – – – – – – – – – – – Show Mark/Line List –...

  • Page 183: Monitoring Dargging Anchor

    B.2.8 Monitoring dargging anchor B.2.8.1 Dragging anchor monitoring circle (Circumference) Move this object Finish Anchor Watch – – – – – – – – – – – – – – – – – – Acquire* – – – – – – – – – – – – – – – – – – Readout chart information...

  • Page 184: List Of Terminologies, Units, And Abbreviations

    B.3 List of Terminologies, Units, and Abbreviations Abbreviations Term A/D = AD Analogue/Digital Alternating Current Acknowledge Acquire, Acquisition Activate Admiralty Information Overlay (additional information to the navigation) Automatic Identification System Amplifiers Alert Management System Antenna ASCII American Standard Code for Information Interchange ASIC Application Specific Integrated Circuit AtoN...
  • Page 185 Abbreviations Term C UP Course Up CA − CFAR Cell Averaging CFAR Cargo.Cat Cargo Category CCRP Consistent Common Reference Point CCRS Consistent Common Reference System Counterclockwise CFAR Constant False Alarm Rate Channel Change Conning Information Display Companion MPU Interface Clear Course Over the Ground Communication Port CONT...
  • Page 186 Abbreviations Term Enhance Estimated Position Electronic Plotting Aids EPFS Electronic Position Fixing System EQUIP Equipment Estimated Time of Arrival FPGA Field Programmable Gate Array Fast Time Constant Forward Gyro Interface GLONASS Global Orbiting Navigation Satellite System Ground GNSS Global Navigation Satellite System Global Positioning System Guard Zone H UP...
  • Page 187 Abbreviations Term Interval IP Address Internet Protocol Address Interference Rejection Interswitch L/L = LL Latitude/Longitude Local Area Network Latitude Liquid Crystal Display Local Mean Time Longitude Line of Position LORAN Long Range Navigation Long Pulse Magnetic Manual Maximum Main Bang Suppression MFDF Medium Frequency Direction Finding Modulator High Voltage...
  • Page 188 Abbreviations Term NMEA0183 NMEA 0183 standards Not More Than No. = NUM Number North Stabilisation Kit North West Operation Operation Unit Own Ship Data OVRD Override Parallel Index Line Personal Identification Number Pulse Length PORT Port/ Portside POS = POSN Position Plan Position Indicator Pulse Repetition Frequency...
  • Page 189 Abbreviations Term Scheme Administrator Search and Rescue SART Search and Rescue Transponder SATNAV Satellite Navigation SBAS Satellite Based Augmentation System Software Development Kit South East Select Sequence System Function ID Serial LAN Interface Circuit Speed Over the Ground Short Pulse Speed SprsLvl Spurious Level...
  • Page 190 Abbreviations Term Transceiver Target Tracking Time to Go Transmitter TXRX Transmitter Receiver Unit U.Map User Map UNACK Un − Acknowledge Up.No. Update Number Universal Serial Bus Coordinated Universal Time Video VDIN Video In Voyage Data Recorder Ver. Version Very High Frequency Volume Variable Range Marker World Geodetic System...
  • Page 191 Abbreviations Term kilogram kilometre kn = kts knot metre mbar millibar minute mile per hour nautical mile radius revolutions per minute second statute mile 付録 D B-57 Appendix B Menu List and Materials...

  • Page 192: List Of Navigation - Related Symbols

    B.4 List of Navigation - related Symbols The navigation − related symbols that are displayed in this equipment are listed below. B.4.1 Navigation monitoring related Drawn object name Drawn object display example Route Appendix B Menu List and Materials B-58...

  • Page 193: List Of Icons/Icon Buttons

    B.5 List of Icons/Icon Buttons The icons/icon buttons displayed in this equipment are listed below. Name Functional outline Displayed image Active Indicates that the computer is indicator processing by an animation. Delete Delete the item. Check again Checks the contents being displayed again.
  • Page 194 Name Functional outline Displayed image Message When there is a message from notification outside (AIS safety related messages, etc.), the number of messages is displayed in a badge over the icon. The message window is displayed when the icon is clicked. Menu "Menu"...
  • Page 195 Name Functional outline Displayed image Expand List Displays the TT/AIS list of the standard mode newly in an expanded window. Standard List Closes the expand mode TT/AIS list (separate window), and displays in the standard mode (information monitoring window pane) Standard AIS Changes to standard AIS display.
  • Page 196 Name Functional outline Displayed image Opens the alert related menu. Alert Settings related to the alerts from the equipment can be made. When clicked, the [Alert] dialogue box appears. Alert settings can be made in the dialogue box. Opens the menu related to the Settings operation settings of the equipment.
  • Page 197 Name Functional outline Displayed image Zoom Area Makes and enlarged display of the specified square area. Radar Overlay Selects ON/OFF of the Radar Overlay display. AIS display Selects ON/OFF of the AIS display. TT display Selects ON/OFF of the TT display. Move Changes the chart display to the backward...

  • Page 198: Cursor Types

    B.6 Cursor types The following cursors are displayed by this equipment (plotter mode). Cursor Cursor Name Description Pointer cursor Indicates a position on the display panel, menu bar, dialogue box, or context menu. Cross-hair cursor Indicates a position on the chart or PPI. Hand cursor Appears when the cursor is moved while pressing the left button on a chart.
  • Page 199 Cursor Cursor Name Description Target activation Appears when the cursor is moved over a sleeping AIS target. cursor Numeric displayed Appears when the cursor is moved over an activated AIS target or AIS target cursor Numeric displayed Appears when the cursor is moved over an AIS digital information AIS target target or a TT digital information target.

  • Page 200: Software Licence Agreement

    JRC can repay you the amount you have paid for it. By using the Software in the state as installed in the device or in any other way, you agree to the provisions of this Licence Agreement (or confirm your prior agreement).

  • Page 201: Font Licence Agreement

    ‒ Limitation of Liability: Except to the extent prohibited by law, Microsoft shall not be liable for any indirect damages, special damages, consequential damages or incidental damages arising from or in relation to the performance or use of the Software. This limitation of liability shall apply even in the case any remedy for damages may not fulfill its essential purpose.

  • Page 202: Ipa Font Licence Agreement V1.0

    IPA Font Licence Agreement v1.0 The Licensor provides the licenced Program (as defined in Article 1 below) under the terms of this Licence Agreement (“Agreement”). Any use, reproduction or distribution of the licenced Program, or any exercise of rights under this Agreement by a Recipient (as defined in Article 1 below) constitutes the Recipient's acceptance of this Agreement.
  • Page 203 The Recipient may install the licenced Program on any number of Computers and use the same in accordance with the provisions set forth in this Agreement. The Recipient may use the licenced Program, with or without modification in printed materials or in Digital Content as an expression of character texts or the like.
  • Page 204 If the Recipient Redistributes the licenced Program pursuant to Paragraph 6 of the preceding Article, the Recipient shall meet all of the following conditions: (1) The Recipient may not change the name of the licenced Program. (2) The Recipient may not alter or otherwise modify the licenced Program. (3) The Recipient must attach a copy of this Agreement to the licenced Program.
  • Page 206 Not use the asbestos For further information,contact: URL Head office : http://www.jrc.co.jp/eng/ Marine Service Department 1-7-32 Tatsumi, Koto-ku, Tokyo 135-0053, Japan 　　　　　　　　　　　: tmsc@jrc.co.jp e - mail One - call 　　　　　　　　　　　: +81-50-3786-9201 ISO 9001, ISO 14001 Certified CODE No.7ZPRD0952 SEP. 2017 Edition 2...

Table of Contents