Table of Contents
Advertisement
Item
Pulse length
Pulse power
Color erase
Transmission
Restore default
*1
: To change transmission power, the installation setting needs to be changed.
Section 8 System Configuration Menus
Setting Contents
Image signals can be changed by changing the
image resolution.
If [Short] is selected, the resolution increases,
however, the power decreases.
If [Long] is selected, the resolution decreases,
however the power increases.
Change this setting when the image sensitivity is
too high or too low.
When [Auto] is set, the output changes according
to the sounding range.
Set an intensity of the function that erases signals
of weak response from the image.
Displays the transmission power that is set.
Resets all the settings relating to the sonar screen
to the default values.
Select [Yes] to reset.
Select [No] to cancel reset.
8-14
Setting value
(Underline:
Default value)
Auto
Short
Medium
Long
Auto
Low
Medium
High
Off
Low
Medium
High
*1
600W
1KW
No
Yes
Advertisement
Table of Contents
