Table of Contents
Advertisement
Item
Depth
Depth1
Depth2
Depth3
Depth4
Depth5
Depth6
Depth7
Current
Layer-A
Layer-B
Layer-C
Layer-D
Layer-E
Setting contents
Set a depth range from Depth1 to
Depth7.
The depth range that can be set from
Depth1 to Depth7 is from 10m to 999m
in 1m units. This range is divided into 7,
creating Depth1 to Depth7.
Setting a water depth range
Select a digit to be set by using
(Left/Right) keys and select a value by
using the
(Up/Down) keys.
After changing the value, determine the
setting by pressing the
key.
The color that is displayed in the setting
screen is assigned to each water depth
range.
Set whether a current vector is to be
displayed.
Display of a current vector can be set to
Enable/Disable for each of five layers,
Layer-A to Layer-E.
When a check mark is attached, the
display is enabled and when a check
mark is removed, the display is
disabled.
A display color is assigned to each
layer.
5-11
Setting value
(Underline: Default value)
Depth1:
10m to (Minimum depth of
Depth2 1m)
Depth2:
(Maximum depth of
Depth1 + 1m) to (Minimum
depth of Depth3 1m)
Depth3:
(Maximum depth of
Depth2 + 1m) to (Minimum
depth of Depth4 1m)
Depth4:
(Center) or
(Maximum depth of
Depth3 + 1m) to (Minimum
depth of Depth5 1m)
Depth5:
(Maximum depth of
Depth4 + 1m) to (Minimum
depth of Depth6 1m)
Depth6:
(Maximum depth of
Depth5 + 1m) to (Minimum
depth of Depth7 1m)
Depth7:
(Maximum depth of
Depth6 + 1m) to 999m
Enable
Disable
Section 5 Map Screen Operation Procedure
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
Advertisement
Table of Contents
