Table of Contents
Advertisement
Item
Own rings size
Set a size of the ring based on own ship as the center.
Setting a radius of the ring
Enter a value by using numeric keys or select a digit to
be set by using the
the value by using the
confirm the change by using the
key.
Own rings value
Set the number of rings based on own ship as the
center.
Head vector
Set a length of the heading vector.
COG vector
Set a vector length of the course over the ground.
When time is selected, the length of the vector can be
calculated from the ship speed.
COG filter
Averages with the time for which variations of the
course over the ground are set.
Averages with the time for which variations of the ship
SOG filter
speeds are set.
Select a port for acquiring position data as the first
1st. Position device
priority.
2nd. Position
Select a port for acquiring position data as the second
device
priority.
TCPA limit
Set a limit value of TCPA (time to closest point of
approach).
When the time for any other ships to reach CPA
(closest point of approach) becomes less than the limit
value that is set here, a TCPA alert can be issued.
Setting Contents
(Left/Right) key, change
(Up/Down) keys, and
(Center) or
8-5
Setting value
(Underline: Default
value)
0.01 to 0.10 to
99.99 nm
1/2/3/4/5
Off
Short
Medium
Long
Off/1 min/2 min/
3 min/4 min/5 min/
10 min/15 min/
20 min/30 min/
1 hour/2 hours/
Short/Medium/Long
Off/1/2/3/4/5/6/7/8/9
/10
Off/1/2/3/4/5/6/7/8/9
/10
GPS ANT
GPS
NMEA0183-1
NMEA0183-2
NMEA2000
GPS ANT
GPS
NMEA0183-1
NMEA0183-2
NMEA2000
None
2 min/5
mim/10min/15min/2
0min/30min/1hour
Section 8 System Configuration Menus
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
Advertisement
Table of Contents
