Deleting A Waypoint; Deleting A Route; Deleting A Route By Selecting From The [Routes] List - JRC JLZ-1000 Instruction Manual

Color plotter
Hide thumbs Also See for JLZ-1000:
Table of Contents

Advertisement

A page menu is displayed.
2
Select [Routes] by using the
(Left/Right) keys and press the
(Center) or
3
Select a route to be edited, press
the
(Menu) key, select [Edit on
chart] from the menu that is
displayed, and press the
(Center),
(Right), or
4
Move the cursor to the new
waypoint positon and press the
key.
To use this waypoint as the destination,
end the route editing by pressing the 、
key.
To add another waypoint, proceed with
Step 5.
5
Add as many waypoints as
necessary by repeating Step 4.
6
Press the
key.
The route editing ends by using the last
waypoint that was added as the
destination.

5.8.3.2 Deleting a waypoint

1
Hold down the
A page menu is displayed.
2
Select [Routes] by using the
(Left/Right) keys and press the
(Center) or
3
Select a route to be edited and
(Center) or
press the
4
Select a waypoint to be deleted by
using the
press the
(Menu) key, select
[Remove] from the menu that is
displayed, and confirm the
selection by using the
(Right), or
5
Press the
key.
Section 5 Map Screen Operation Procedure
key.
key.
(Screen) key.
key.
key.
(Up/Dwon) keys,
(Center),
key.
5-28
The route editing ends.
6
Close the page menu by pressing
the
key.

5.8.4 Deleting a route

The route that has been set is kept even if the
power supply of the equipment is turned off.
To delete a route from the equipment, use the
following procedure.
Memo
The route that is currently used by route
navigation cannot be deleted.
5.8.4.1 Deleting a route by selecting
from the [Routes] list
1
Hold down the
A page menu is displayed.
2
Select [Routes] by using the
(Left/Right) keys and press the
(Center) or
The ► mark is displayed on the left
side of the route name that is being
used by the route navigation.
3
Select a route to be deleted, press
the
(Menu) key, select [Delete]
from the menu that is displayed,
and confirm the selection by using
the
(Center),
key.
A confirmation message is displayed.
4
Select [Yes] and confirm the
selection by pressing the
(Center) or
To cancel deletion, select [No] and
confirm the selection.
(Screen) key.
key.
(Right), or
key.

Advertisement

Table of Contents
loading

Table of Contents