JRC JLZ-1000 Instruction Manual page 23

Color plotter
Hide thumbs Also See for JLZ-1000:
Table of Contents

Advertisement

Notes on using the new pec chart
When an SD card of the new pec chart is inserted and the map setting is set to new
pec, new pec data is displayed.
Do not insert or remove the SD card while the equipment is used.
Otherwise, a failure, a malfunction, or an injury may be caused.
When extended contour data is recorded in the chart data, detailed contour lines can
be displayed.
Extended contour line ON
Extended contour line OFF
On the normal new pec chart line, 10m and 5m are clearly color coded. However,
when the extended contour line display is set to On, they are no longer color coded.
When the chart is used for navigation guideline, it is very dangerous to use the chart
by setting the "extended contour line ON" as shallow water depths are not clearly
color coded. Do not set the extended contour line display to ON except for the
judgement of approximate undulation of the sea floor for fishing and so on.
An incorrect use may cause serious accident. Utmost care is necessary.
xxi

Advertisement

Table of Contents
loading

Table of Contents