Table of Contents
Advertisement
Item
Land &
Port object
Sea
(At
Colored seabed
Navionic
s only)
Dynamic tide &
current
Default mark
External mark
Section 8 System Configuration Menus
Setting Contents
Set whether to display a port object.
Set whether to display a colored seabed.
When a check mark is attached, this item
is enabled (display) and when the check
mark is removed, this item is disabled
(undisplay).
Set whether to display current and ocean
time.
When a check mark is attached, this item
is enabled (display) and when the check
mark is removed, this item is disabled
(undisplay).
Hold down the
(Mark) key and
select a shape of the mark to be
registered at the own ship's position from
the following:
Press the external event switch and
select a shape of the mark to be
registered from the following:
8-10
Setting value
(Underline: Default
value)
Enable
Disable
Enable
Disable
Enable
Disable
<Default value>
<Default value>
Advertisement
Table of Contents
