Table of Contents
Advertisement
Item
Track interval
Set a time interval for recording tracks.
Active circle
Set a range for automatically activating the AIS target.
Set a circle based on own ship at the center. When an AIS
target enters in the circle, the symbol is activated and
displayed.
Setting a radius of the range
Select a digit to be set by using the
keys, change the value by using the
keys, and confirm the change by using the
key.
Lost time
Set a time required to identify the AIS target to be in a lost
state.
Delete time
Set a time from identifying of an AIS target to be in a lost
state to clearing of the display.
Special target
Set any AIS target as a special target. A specific display
method can be set to a special target individually.
Specify an AIS target as a special target with the MMSI
(Marine Mobile Service Identify).
For the operation procedure, see Section 8.8.1 "Setting a
special target".
Restore
Reset AIS information.
default
To reset, select [Yes].
To cancel reset, select [No].
Section 8 System Configuration Menus
Setting Contents
8-22
Setting value
(Underline: Default
value)
Off/ 5 sec/ 10 sec/
15 sec/ 20 sec/
30 sec/ 1 min/
2 min/ 3 min/ 4 min/
5 min/
15 min/
30 min/ 60 min
0.01
to
9.99nm
(Left/Right)
(Up/Down)
(Center) or
30 sec/ 1 min/
2 min/ 3 min/ 4 min/
5 min/ 6 min/ 7 min/
8 min/ 9 min/
10 min/ 15 min/
20 min/ 30 min/
60 min
30 sec/ 1 min/
2 min/ 3 min/ 4 min/
5 min/ 6 min/ 7 min/
8 min/ 9 min/
10 min/ 15 min/
20 min/30 min/
60 min
-
No
Yes
10 min/
20 min/
0.10
to
Advertisement
Table of Contents
