Local Control (Local Mode)
PARAMETER menu\PARAMETER menu "Radio".doc
3.4.7.4.1
TX PARAMETER Menu
Meaning
of entries
Display text
TX Parameter
PWR
MOD
SWR
Test PTT
Test TONE
Test 1k2
T X
P a r a m e t e r
P W R
0
M O D
0
S W R
1
T e s t
P T T
Fig. 3.30
TX PARAMETER menu.
For ACARS mode, the last line of the MMI will change in order to provide
1200 Hz and 2400 Hz Test Tone.
T e s t
1 k 2
Fig. 3.31
TX PARAMETER menu in ACARS mode.
T e s t
D 8 P S K
Fig. 3.32
TX PARAMETER menu in VDL Mode 2.
Values
Menu name
49 W
Display of transmit power as a bar chart and numeric
value (with decimal place up to 9.9 W; no decimal place
starting from 10 W).
72 %
Display of modulation depth for AM as a bar chart and
numeric value, for example.
1.3
Display of the antenna matching as a bar chart and
numeric value (optimum, VSWR = 1; otherwise, value in
range 1 to approx. 26).
−
Test for PTT function
Transmitter can be powered up in the unmodulated CW
mode via the ENTER key.
Note: Only available in AM mode.
−
Test for TONE function
Transmitter can be powered up at a test modulation
1 kHz and the configured AM modulation depth via the
ENTER key.
Note: TX transmission is switched on as long as the
ENTER key is pressed or until the timeout PTT timer
switches off the transmission.
Note: Only available in AM mode.
–
Test for TONE function
Transmitter can be powered up at a test modulation
W
5 0
%
1 0 0
1 . 3
2
5
T e s t
T O N E
T e s t
Description
3.47
R&S XU 4200
L O C
4 9
7 2
2 k 4
6166.5368.02.01