Remote Control Commands - R&S 4200 Series Operating Manual

R&S XU 4200
6.3

Remote Control Commands

List of Remote Control Commands\List of Remote Control Commands "Radio".doc
6166.5368.02.01
The radio can be remotely controlled and monitored via its IP-interface.
Remote control is possible either via SNMP or the Rohde & Schwarz
GB2PP protocol and specified in a separate interface control document
(ICD).
The commands on the LAN interface between the radio and a VDL ground
computer are specified in a separate ICD.
Please contact your sales representative to obtain the ICD or MIB
documents.
Remote Control Commands
6.18