R&S XU 4200
3.2.2.4
Service Mode
Description
Example
6166.5368.02.01
The interactive service mode of the transceiver is used during the
configuration of basic parameters such as IP address, preset pages and
installation info.
Using the Service and Maintenance Tool R&S ZS 4200, you can change
the basic parameters via service PC after entering the interactive service
mode.
All existing remote connections and any local mode will be interrupted. The
display shows that the radio is in service.
After all configurations have been completed, the transceiver performs a
reset in order to activate the basic parameters. Leaving service mode
requires a reset.
I N T E R A C T I V E
C o n f i g
a r e
R e s e t
R a d i o
Fig. 3.6
S E R V I C E
P a r a m e t e r s
c h a n g e d
t o
e x i t
Service mode.
3.8
Introduction