R&S 4200 Series Operating Manual page 181

Troubleshooting
Code Message
0351 TX PART a b c
0352 TX RST REQ RC
Level Config
W – Information about
booted TX FW and
device FW validity.
a = currently booted
partition, i.e. '1' or '2',
b = version number,
e.g. '10.xx',
c = comparison result
defined as a bit-wise
mask (little endian),
bit 0 set – comparison
fail, currently booted
partition numbers not
bit 1 set – comparison
fail, part numbers not
bit 2 set – comparison
fail, version numbers
E.g. '0' for case of
comparison passed or
'6' for case when
currently booted
partition numbers are
equal on MMI, TX and
RX, but part numbers
and version numbers
are not equal on at
least two modules.
W – After RC client sends
an RST command to
TX module, but before
4.15
Note
information only (see
where:
equal,
equal,
not equal.
information only (see
reboot.
R&S XU 4200
Action
This event is for
chapter 4.2.3).
This event is for
chapter 4.2.3).
6166.5368.02.01