Direct Selection Of Radio Functions; Fig. 3.19 Direct Selection Of Radio Functions - R&S 4200 Series Operating Manual

R&S XU 4200
3.4.6.1

Direct Selection of Radio Functions

Introduction
For example:
Power up the
transmitter with test
modulation
6166.5368.02.01
After you select a menu, various radio functions will be displayed. Radio
functions are carried out directly after you press the ENTER key.
1. Press the MENU key.
2. Using the ▼ or ▲ cursor keys, select the MEASUREMENT submenu.
M e a s u r e m e n t
3. Press the ENTER key.
The submenu will be opened.
4. Using the ▼ or ▲ cursor keys, select the TX PARAMETER submenu.
T X P a r a m e t e r
5. Press the ENTER key.
The submenu will be opened.
T X P a r a m e t e r
P W R
0
M O D
0
S W R
1
T e s t P T T
6. Using the ► or ◄ cursor keys, select the TEST TONE function.
T e s t P T T
Fig. 3.19
7. Press the ENTER key.
The test will be started. The transmitter will be powered up with a 1 kHz
test tone and the configured AM modulation.
Note: TX transmission is switched on as long as the ENTER key is
pressed or until the timeout PTT timer switches off the transmission.
Local Control (Local Mode)
W 5 0
% 1 0 0
1 . 3
2 5
T e s t
T e s t
Direct selection of radio functions.
3.38
L O C
4 9
7 2
T O N E
T O N E