Entering Numeric Parameters; Fig. 3.22 Frequency Entry - R&S 4200 Series Operating Manual

Local Control (Local Mode)
3.4.6.4

Entering Numeric Parameters

0.
Entering numeric parameters xU\Entering numeric parameters xU "Radio".doc
Introduction
R&S XU 4200
example
Enter new value
You can enter numeric parameters by using the numeric keys and the ►
and ◄ cursors.
You can enter the value directly via the numeric keypad. Start with the
foremost position. After each digit, the cursor will jump to the next position.
After you enter the last digit, the cursor will remain at that position. To
accept the value, press the ENTER key. The system will automatically
check for valid limit values and consistency.
1. Press the MENU key.
The cursor will point to the OPERATION submenu.
2. Press the ENTER key.
The cursor will point to ACTIVATION.
3. Using the ▼ or ▲ cursor keys, select FREQUENCY.
O p e r a t i o n
A c t i v a t i o n
P r e s e t
M o d e
F r e q u e n c y
O f f s e t
R F P o w e r
4. Press the ENTER key.
Digit entry is active. The cursor is located at the first position.
F r e q u e n c y
5. Overwrite the old value by using the numeric keys, e.g. 117.675 MHz.
F r e q u e n c y
1 1 7 . 6 7 5
E n t e r i n
Fig. 3.22
Note: You can skip spaces by using the ► or ◄ cursor keys.
N o
1 2 3 . 8 1 5
T X
1 2 3 . 8 1 5
I C A O F o r m a t
Frequency entry.
3.41
R&S XU 4200
L O C
O n
- -
A M
- -
L o w
L O C
6166.5368.02.01