Fig. 3.90 Cabling For Operation With The External Power Amplifier Jotron - R&S 4200 Series Operating Manual

Table of Contents

Advertisement

R&S XU 4200
3.13.2.2
Cabling
Instructions
Cabling
Fig. 3.90
3.13.2.3
Configuration
Configuration of
radio using
the R&S ZS 4200
ATTENTION
6166.5368.02.01
1.
Connect the USER_OUT output (X7.14) of the radio to the External
Key input (Remote Facility Connector, pin 7) of the amplifier and the
USER_IN input (X7.15) of the radio to the SWR ALARM contact
(Remote Facility Connector, pin 10) of the amplifier. Connect the
second pin of the SWR ALARM contact (Remote Facility Connector,
pin 9) to ground. Connect the ground contacts of the two units (X7.3,
X7.4, X7.9 and Remote Facility Connector, pin 8 and 9) together.
2.
Connect the Common Antenna output (X3) of the radio to the RF IN
input of the amplifier.
3.
Connect the RF OUT output of the amplifier to the antenna.
Radio
X7
USER_IN
15
USER_OUT
14
GND
3,4,9
X3
Common
Antenna
Cabling for operation with the external power amplifier Jotron.
Use the Service and Maintenance Tool R&S ZS 4200 to configure the radio
for controlling the external power amplifier.
1.
Set the "External Power Amplifier" parameter on the radio to "Jotron".
2.
Set the "TX Output Power Level Low" 6 dB lower than "TX Output
Power Level Normal". For example, when "TX Output Power Level
Normal" is set to 40 W, the "TX Output Power Level Low" shall be set to
10 W.
3.
Set the "TX Output Power Level Normal" to max. of 25 W for Jotron
PAV-100 and max. of 50 W for Jotron PAV-200.
Note: The operation of the Service and Maintenance Tool R&S ZS 4200 is
described in detail in the corresponding operating manual.
Risk of destruction of amplifier due to high input power
The Jotron PAV-100 VHF external power amplifier can be operated only at
a maximum input power of 25 W. The Jotron PAV-200 VHF external power
amplifier can be operated only at a maximum input power of 50 W. Higher
input power can result in destruction of the amplifier!
Note: For configuration of the amplifier please refer to the technical manual
of Jotron PAV-100/200.
External Power Amplifiers
Amplifier PAV-100/200
REMOTE
10
SWR ALARM
7
External Key
8,9,15
GND
ANTENNA
RF INPUT
3.100
Antenna

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xu 4200

Table of Contents