Fig. 2.3 Rear Cabling - R&S 4200 Series Operating Manual

R&S XU 4200
Rear Cabling\Rear cabling "Radio".doc
2. 3.
1.
6166.5368.02.01
Note: The DC input/battery input (X2) of the radio is intended for a DC-only
supply of the radio or connection of the external backup battery stacks for
bridging interruptions of an AC supply of the radio. Rohde & Schwarz
recommends using DC cables with a length of < 3 m and an appropriate
wire gauge.
Note: Do not connect/disconnect any cable when the radio is operating.
Connect all other cables before the radio is connected to AC and/or DC
power.
5.
4.
6.
Fig. 2.3
3.
7.
Rear cabling.
2.6
Basis Cabling
9.
8.