External Automatic Filters; Telsa External Automatic Filter; Introduction/Overview; Cabling - R&S 4200 Series Operating Manual

External Automatic Filters

3.7 External Automatic Filters
Motor Tuned Telsa Filter\Motor tuned telsa filter "Radio".doc
3.7.1

Telsa External Automatic Filter

This chapter
3.7.1.1

Introduction/Overview

Introduction
3.7.1.2

Cabling

Instructions
Fig. 3.77
This chapter provides information about cabling and configuration using the
Telsa external automatic filter together with the radio.
The radio supports several Telsa Automatic Cavity Filters with single and
double cavity.
The Telsa external automatic filter is optional hardware equipment and it is
not contained in a standard shipment.
1. Connect the filter to the RS-485 interface of the radio. In case of the
transceiver R&S XU 4200 the filter must be always connected to the TX
module via X7.
Telsa external automatic filter connection.
3.79
R&S XU 4200
6166.5368.02.01