Menu Key; Enter Key; Esc Key - R&S 4200 Series Operating Manual

R&S XU 4200
3.4.2.3

MENU Key

Function
3.4.2.4

ENTER Key

Function
3.4.2.5

ESC Key

Function
SQ Key\SQ Key "Radio".doc
6166.5368.02.01
Pressing the MENU key will take you to the main menu at any time.
The ENTER key is used to navigate within the menus and to accept
settings.
The ENTER key has the following functions:

Open submenus

Open selection and entry fields

Directly initiate a function or toggle a setting

Confirm an entry; the new value will be accepted
The ESC key is used to navigate within the menus and to terminate
settings.
The ESC key has the following functions:

Close submenus

Close selection and entry fields

Cancel an entry; the previous value will be retained

Initiate a radio reset if pressed and held longer than five seconds
Note: If you press and hold the ESC key for longer than five seconds, the
radio will perform a complete reset (cold start).
Local Control (Local Mode)
3.28