Fig. 3.52 Ipv6 Gate Address Setting - R&S 4200 Series Operating Manual

Local Control (Local Mode)
IPv6 Gate Address Setting
Meaning
of entries
Display text
GATE Setting the gateway IP address of the radio is possible by pressing the ENTER key
while the cursor is pointing to the IP item. Using the ◄ and ► cursor keys, the
cursor will be moved to the right or left and single digits or characters of the IP
address will be displayed immediately.
The value selected by the cursor will be inverted and can be changed using the
numeric keys. If the key is pressed once, the corresponding digit is displayed on
the cursor position. If the key is pressed twice or more, it is possible to rotate in the
list of these characters {., :, a, b, c, d, e, f, /}. Each pressing of the key displays the
next character from the list.
The ▲ cursor key inserts a new character behind the cursor; the default value is ':'.
The ▼ cursor key removes the digit or character on the cursor position.
To save the changed value and leave the window, press the ENTER key. To keep
the current value unchanged and to leave the window, press the ESC key.
G A T E
2 0 0 1 : d b 8 : : 1
Fig. 3.52 IPv6 gate address setting.
Description
3.61
R&S XU 4200
L O C
6166.5368.02.01