Printing From The Custom-Sized Tray; Setting Custom-Sized Paper - Intec CS4000 User Manual

Printing from the Multi-Purpose Tray
 Using Mac OS X Printer Drivers
1
Open the fi le to be printed using
1
TextEdit.
2
Click [Page Setup] in the [File] menu.
3
Select the paper size and print
orientation using the page setup dialog
box, and click [OK].
2
3
4
Select [Print] in the [File] menu.
5
Select [Paper Feed] in the print dialog
box.
4
6
Select [Multi-Purpose Tray] in [All Pages
From].
Memo
 Normally, select [Auto]. Select [Auto] to use the
value set using the printer control panel.
7
Select [Print Options] using the print
dialog box.
8
Chick the [Feed] tab in the printer
setup panel, and select [Media Type]
and [Media Weight].
9
Click [Print] to print.
- 98 -
Printing from the
Custom-Sized Tray

Setting Custom-Sized Paper

Paper will be printed face-side up.
Note
 If the ream weight of the custom-sized paper is 128 g/m
50 sheets of custom-sized paper may be set in the custom-
sized supporter.
 Custom-sized paper should be under 328 mm in width and
1321 mm in length.
1
Lift the custom-sized tray stacker
towards the printer side.
2
Open the toner replacement cover.
Printing from the Multi-Purpose Tray
3
Pull the set lever on the right side of the
paper supporter on the multi-purpose
tray towards yourself, and adjust the
paper guide to the width of custom-
sized paper.
Reference
"Printing from the Multi-Purpose Tray" (P.92)

2
,
4
Release the set lever to secure the
paper guide in place.
5
Align the edge of custom-sized paper
with the paper storage section of the
multi-purpose tray, and lower paper to
the storage section.
- 99 -
1
2
3
4