Operating Environment; Printer Driver Types; Connecting Cables; Connecting Using Lan Cables - Intec CS4000 User Manual

Connecting the PC

Operating Environment

The device is compatible with the following operating systems (OS).
1
 Windows 8.1/Windows 8.1 (64-bit version)*1
 Windows 8/Windows 8 (64-bit version)
 Windows Server 2012
 Windows 7/Windows 7 (64-bit version)
 Windows Vista/Windows Vista (64-bit version)
2
 Windows Server 2012 R2
 Windows Server 2008 R2
 Windows Server 2008/Windows Server 2008 (x64 version)
 Windows XP/Windows XP (x64 version)
 Windows Server 2003/Windows Server 2003 (x64 version)
3
 Mac OS X 10.5 to OS X 10.9
*1: For Windows 8/8.1, only desktop mode is compatible.

Printer Driver Types

4
The following types of printer driver can be installed.
 Windows
Type
PS Applies to the printing of documents that include PostScript fonts and EPS
data.
*1
Applies to the printing of business documents.
PCL
*1: Windows XP requires that Internet Explorer 6.0 or later (MSXML 4.0 or later) be installed.
 Mac OS X
Type
PS Applies to the printing of documents including PostScript fonts and EPS data.
Can also be used for regular printing.
Note
Descriptions may differ depending on the printer driver, and Windows or Mac OS version.
*1
Explanation
Explanation
- 56 -

Connecting Cables

Connect the device to a PC or network.
The device is equipped with the LAN (network)
interface connectors and USB interface
connectors as standard. Connections can be
made to the network directly using LAN cables,
and to the PC using USB cables.

Connecting Using LAN Cables

Connecting the device to a network such as
LAN (Ethernet*), etc., enables the device to
be shared by all the PCs on the network. This
system can be used by OS such as Windows or
Mac, etc.
*: The device is equipped with network interfaces compatible
with 10BASE-T/100BASE -TX/1000BASE-T as standard.
Windows Macintosh
Windows
Macintosh
Hub
 Preparations
LAN cable Hub
Note
LAN cables and hubs are not enclosed with the device.
Prepare LAN cables (category 5 or greater, twist pair
cable, straight) and hubs as necessary.
The setup must be changes if using with 1000BASE-T
as the factory default settings are "Gigabit network:
Disabled" in the administrator setup menu.
Setup method: In the control panel, select [Admin
Setup]> Enter the password> [Network Setup]> [Gigabit
network]> [Enable].
Connecting the PC
 Connecting LAN Cables
1
Connect the LAN cable to the LAN
(network) interface connector (
Connect the other end of the LAN cable
to the hub connector ( ).
LAN cable LAN (network)
interface
Connector
- 57 -
1
).
2
3
4