Printing from the Multi-Purpose Tray
4
Adjust the paper guide (
) to the width
of the paper that has been set.
1
2
5
Thoroughly sort the paper. Carefully
align the ends of the paper horizontally.
3
6
Place the print side face-up, and set the
4
paper.
Note
Do not set the paper beyond the MP paper guide (
7
Adjust the paper guide to fi t the width
of the paper that has been set.
8
Release and return the setting lever (
to its original position.
Note
When adding paper, remove the paper in the multi-
purpose tray, and align the additional paper top, bottom,
left, and right before setting.
Do not place anything other than the paper to be printed
on the multi-purpose tray, apply pressure from above, or
apply unnecessary force.
The paper supporter will automatically lift up when the
paper is set in place. If the paper supporter gets in your
way of setting paper in the tray, place paper after opening
the toner replacement cover, and then close the cover
when it is set in place.
).
- 94 -
Printing from the Multi-
Purpose Tray
Print to the paper set in the multi-purpose tray.
The main operating procedures are described
below.
1
Set the paper (
) in the multi-purpose
tray (
).
)
2
Open the fi le to be printed.
3
Specify the [Multi-Purpose Tray] using
the printer drivers to print.
This section explains how to print using the
multi-purpose tray from the printer drivers.
Windows PS printer driver
Windows PCL printer driver (P.97)
Mac OS X printer driver (P.98)
Further, this explanation uses "WordPad" for
Windows as the application used. For Mac OS X,
the example uses "TextEdit".
Reference
For how to install the printer drivers, see
PC"
(P.55).
Printing from the Multi-Purpose Tray
Using Windows PS Printer Drivers
1
Open the fi le to be printed using
WordPad.
2
Click [Page Setup] in the [File] menu.
3
Select the paper size and print
orientation, and click [OK].
4
Click [Print] in the [File] menu.
5
Click [Preferences].
6
Click [Advanced] in the [Layout] tab.
"Connecting the
- 95 -
1
2
3
4