Manual Configuration; About The Enclosed "Software Dvd-Rom - Intec CS4000 User Manual

Manual Confi guration
z z
The following user manuals are enclosed with the product.
The e-manual is stored on the "Software DVD-ROM".
1
Read this first
Step
Opening the box and installing the printer
Easy Guide (Set-up Guide)
This guide uses illustrations to explain the
methods from opening the box to installation.
For the advanced setup guide, see the "Basic".
・ Pamphlet
Preparing the printer to print
Basic (This manual)
This guide describes the precautions for safe
use of the device. Make sure to read before use.
Further, basic uses from the device installation
methods to initial printing are also explained.
・E-format
The device functions are described in the
appendix.
2
Read these guides as necessary
S tep
Try using various functions
Advanced
This guide explains the various paper print methods
and how to use useful functions. Read to optimize the
printing environment or to adjust the color, etc., using
the enclosed utility software.
・E-format Further, this guide also explains the items that can be
set from the control panel, and the network settings.
Read for any points that are not understood, or for maintenance
Troubleshooting/Daily
Maintenance Manual
This manual explains the procedures for paper jams, and
troubleshooting method if an error message is displayed. This
manual also explains daily maintenance such as now to replace
・E-format
consumables and maintenance units, and cleaning, etc.
Using CS5000
Separate Volume Spot Color Guide
This guide explains how to set up the Spot
Color kit and check the printer drivers, and
how to print using Spot Color. Make sure to
read before use.
・E-format
• Checking the product
• Parts nomenclature and functions
• Using the device to its fullest
• Installing the device
• Turning ON and OFF the power supply
• Test printing using the printer only
• Connecting to a PC
• Paper
• Printing
• Paper ejection
• Setting Power Save mode
• Setting auto power OFF
• Checking the print quantity,
consumables, remaining maintenance
unit quantity, and remaining service life
• Cancelling a print job
• Adding printers using LPD protocols
(TCP/IP)
• Table of control panel menu items
• Basic Windows procedures
• Printer specifications
• Useful print functions
• Adjusting the color
• Using utility software
• Network settings
• Checking and changing printer settings
using the control panel
• Troubleshooting
• Maintenance
• Consumables, maintenance products,
options, color management server,
etc.
• Setting the Spot Color kit
• Control panel explanation
• Checking the printer drivers
• Table of printer driver functions
• Printing on color paper
• Printing on transparent film
• Specifying and printing Spot Color
toner using the applications
• Fine-tuning white
• Switching Spot Color kits
- 2 -
About the Enclosed " Software DVD-ROM"
z z
When the "software DVD-ROM" enclosed with the device is placed in the DVD-ROM drive, the following
menu screen will be displayed.
Memo
z This example uses the Windows screens.
z If using a Macintosh, double-click the [Intec] icon.
You can add and select printer
drivers.
Click here to install the standard Describes the selected
printer drivers. printer and PC connection
type.
Select the device and
Select the printer
PC connection method.
model.
*1: Access is only possible using an internet-enabled environment.
*2: To view the PDF manual, Adobe Reader/Adobe Acrobat Reader is required.
You can install and set the device
utility software.
To learn the easy device functions
and various settings, see the PDF
manual from here.
*2
You can register as a Close the "Software
user from the Intec DVD-ROM".
homepage.
*1
- 3 -