Table of Contents
Advertisement
Installing the Device
Installation Procedure
Work according to the relevant procedures and the customer installation conditions. If not mounting
1
any options, skip the reading of the procedures described as "Optional".
1
Opening the Package and Installation
2
Mounting Consumables (P.38)
3
Mounting the Expansion Tray Unit (Optional) (P.42)
4
Mounting the Built-in HDD (Optional) (P.46)
2
5
Connecting Using LAN Cable (P.57)
6
Connecting Using USB Cable (P.58)
Installing and Connecting the Color Management Server
7
("Fiery
®
for Intec Installation Guide")
8
Connecting Power Cables (P.51)
3
9
Connecting to PC (P.55)
10
Adding Options (P.76)
Printing from Trays (P.89)
11
Printing from the Multi-Purpose Tray (P.95)
Opening the Package and
4
Installation
This section explains the procedure from opening
the package to removing and installing the
product.
Opening the Package and Moving
the Device
Make sure to install in a suffi ciently robust
location that can support the weight of the
device and its options. Do not install in unstable
locations such as on unsteady tables or slanted
locations, or in locations with strong vibrations.
Doing so risks causing injury due to the device
falling or toppling.
Memo
For device installation locations, see
"Installation
Conditions"
(P.33).
CAUTION
There is a risk of injury.
The weight of the device is approx. 97kg* for
model CS4000, and approx. 110kg* for model
CS5000, so make sure to use at least 4 people
to lift.
*: Includes consumables such as image drums and toner
cartridges, etc.
(Optional)
(Optional)
(Sold
separately)
(Optional)
The main unit weights are as described below.
With the toner
With the toner
cartridge and
cartridge and
image drum
image drum
mounted
removed
CS4000
Approx. 97kg
Approx. 82kg
CS5000
Approx. 110kg
Approx. 91kg
- 36 -
1
Open the package, and remove the
device accessories (
), and enclosed
manual, protective equipment, and
shock-absorbing material (
).
Note
The packing and protective equipment are used
when shipping the device, so store them carefully.
Installing the Device
2
Remove the cover bag enclosing the
main printer unit.
Note
Do not remove the tape securing the protective
equipment, paper feed trays, and side covers before
transporting the device to its installation location.
The trays and covers opening during transport may
cause unexpected injury.
3
Remove the three carrying levers at the
bottom of the printer (
), and check
the three locations of the carrying
handles (
).
- 37 -
1
2
3
4
Hide quick links:
Advertisement
Table of Contents
